FLORIDABOY
New Member
- Joined
- Aug 31, 2007
- Location
- LANCASTER,SC
does anyone know the width of the tubing used for the front hangers??could anyone poss give me a lay out (deminsions)im trying to do this on a real tight budget..thanks
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
sas on a 95 z71
- Thread starter FLORIDABOY
- Start date
8379qtj10
Well-Known Member
- Joined
- Jan 22, 2007
- Location
- Washington N.C
I have seen it done on a tight budget
A good friend of mine did it by looking at a ORU kit
It didn't turn out well...don't get me wrong it worked but he is now in the process of cutting it out and redoing it.
PLUS the steering mods cost money to do right...and I believe(as others on the board) that steering MUST be done right.
I love to watch good fab work and new ideas but do it safe for you and everybody else on the HWY.
Daniel used 3x3 tubing and made his hangers out of .25 steel
He worked in a fab shop with a press brake and made about 20 brackets untill he got it right. Steel was free.
Good luck
A good friend of mine did it by looking at a ORU kit
It didn't turn out well...don't get me wrong it worked but he is now in the process of cutting it out and redoing it.
PLUS the steering mods cost money to do right...and I believe(as others on the board) that steering MUST be done right.
I love to watch good fab work and new ideas but do it safe for you and everybody else on the HWY.
Daniel used 3x3 tubing and made his hangers out of .25 steel
He worked in a fab shop with a press brake and made about 20 brackets untill he got it right. Steel was free.
Good luck
FLORIDABOY
New Member
- Joined
- Aug 31, 2007
- Location
- LANCASTER,SC
no im goint to buy a cross over set up & rear leaf hangers,but its the front that looks so simple....but i just want some advise