SBC Intake?

kaiser715

kaiser715

Doing hard time
Joined
Jun 1, 2006
Location
7, Pocket, NC
Getting ready to do a refresh on the SBC in my M715. It's a 1977 4-bolt 350. Rebuilt the motor from a junker about 20 years ago. Currently has the stock iron intake manifold. New axles going in are 4.56, manual trans with 27% o/d. I got specs on cam someplace, but it's some sort of a RV grind.

As I put truck back together, will probably do aftermarket TBI -- Sniper, MSD, Fitech or whatever. So should be squarebore.

So......What's a good all-around aluminum intake for this mix?
 
I would throw edelbrock pro Flo 4 in the mix to consider too.

If you’re stuck on throttle body injection it looks like most of them don’t like dual plane intakes.
 
Back
Top