deerecrossing
Active Member
- Joined
- Jan 22, 2007
- Location
- pfafftown
where do the shims go on the hp44, do they go next to the bearing or behind the bearing before you press them on
shiming out a 78 dana 44
- Thread starter deerecrossing
- Start date
Jeff B
Thanos was right
- Joined
- Dec 23, 2006
- Location
- Lincolnton N.C.
Between carrier & bearing
check out randys ring & pinion they have good tech support
check out randys ring & pinion they have good tech support