Elliott
Well-Known Member
- Joined
- Mar 20, 2005
- Location
- San Diego, CA
Is there any way to dissassemble a steering box without totally screwing it up? I have a waggy box that looks a little rough and I want to check out the insides before I go to the trouble of fitting it on the ZJ.
I know the cover can be popped off via the 4 bolts on top but I believe the bolt in the middle is some kind of adjuster with very low tweaking tolerances. There was no fluid in it when I took off all the fittings so I just wanted to make sure it wasn't rusted and siezed up. Heres a pic, any advice would be appreciated.
I know the cover can be popped off via the 4 bolts on top but I believe the bolt in the middle is some kind of adjuster with very low tweaking tolerances. There was no fluid in it when I took off all the fittings so I just wanted to make sure it wasn't rusted and siezed up. Heres a pic, any advice would be appreciated.