Tacoma Csas pictures

[tacomatrd00]

I got my sas done this weekend and did some flexing out at my buddies house to check the linkages. Turned out very nice rides better than stock. Taking it to uwharrie this weekend for the last run of the year. Let me know what ya think. PS the pictures were before all the painting and grinding welds haha.

 

[tacomatrd00]

some more!

 

[pipeline]

looks good to me. see ya this weekend.

 

[72Rockcruiser]

SWEET! I'll be out there too.

 

[Bigben75ford]

Glad to see another SASed yota!I was wondering when you were going to do that!WHats your specs?Looks like your sitting high!

 

[tacomatrd00]

it is sitting with about a 8" lift without the 3" body lift.

 

[johnski]

it is sitting with about a 8" lift without the 3" body lift.

I've always loved the look of SAS'd tacos. You plan to dump the body lift or just go with a bigger tire? Not trying to be nit-picky here, but from the pics it looks like those from arms need to be beefed-up.

 

[Rich]

try .jpg next time.

 

[tacomatrd00]

I am keeping it like it is, the front will settle about a inch. I don't have to much weight so the arms should be ok I extended them with 1/2 thick tube. All the ford guys say brace them and the toyota guys told me it would be ok so I guess I am walking the line.

 

[johnski]

I am keeping it like it is, the front will settle about a inch. I don't have to much weight so the arms should be ok I extended them with 1/2 thick tube. All the ford guys say brace them and the toyota guys told me it would be ok so I guess I am walking the line.

Us ford guys have seen too many extended radius arms pretzel under the weight of a fullsize rig. I'll bet after you bear the weight of your vehicle on an arm against a rock that you'll see why, even with a taco. But, I guess that's the way it goes. Bend it/break it, then build it stronger.