well nothing to huge going on but I did take the jeep out for a ride this weekend and I could not go over 35mph without the jeep wanting to go all over the road 
so got it home and found out my toe in was all messed up.. here is how I fixed it by myself. attach a piece of wood to outside of each tire and that worked.
[ATTACH=full]170473[/ATTACH]
[ATTACH=full]170474[/ATTACH]
then I started to work on my ARB switch mounts.. the one thing I have learned from others is when wheeling if you can see the switches you forget if they are on or off.. so I sat in my drivers seat and looked around for the best location that I could reach when strapped in with my harness and here is what I came up with..
[ATTACH=full]170475[/ATTACH]
[ATTACH=full]170476[/ATTACH]
[ATTACH=full]170477[/ATTACH]
