taking out the small lugs

chromerunner

chromerunner

The Scrambler
Joined
Jun 18, 2006
Location
Biscoe NC
wanting to take out the small lugs on a set of boggers i have. Where is the best place to buy the tool for this? which ones/brands do mostof yall use etc...links would help. thanks
 
Not sure there is a TOOL for this, Ive seen sawzall, side grinder and even heat be used
 
Only air tool I can think of is a cut off tool similar to a smaller grinder...
Ive seen siping irons, but never a heat tool to remove lugs...
 
chisel and one of hose small handheld torch's you can get at walmart or lowes or somewhere..............

just heat the tip of the chisel up and you use it to cut out the lug. works really well, did it on my friends boggers
 
i have seen a video on youtube where a guy used a hot knife on a bogger and it turned out great. i'll see if i can find the video for you.
 
6509-22_big.jpg


and it doesn't smell like burnt assholes and get melted rubber everywhere.
 
I saw a guy on priate that had a angle grinder with some kinda disc with a chain saw blade on it....that seems like the way to go
 
The sawzall worked killer on my boggers the tsls i did was another story i used a 7000 rpm grinder and it took 6 hours and i didn't really do much to them. I prefer the sawzall 10 to 1
 
nichrome, a regulator, some 120v, and a cheese slicer and you could probably get something going.

Seriously, my dad and I made a larger bow to cut foam wing spars with and did it this way. Worked great.
 
Back
Top