Those running/have run ORI struts

CrawlnYota33

Well-Known Member
Joined
Mar 27, 2005
Location
Winston Salem
Just doing some engine hoist flexing the other day and noticed my ORI's ST (mine are on the front) won't move or stick when lifting one tire until I push up or jump on one side, seems like they "break loose" when I do that but then stick again. I know it wont do that when driving/racing/crawling just wanted to see if anyone elses done it or is somthing wrong with mine. Does it have somthing to do with the stability tech in the ORI's? My rear air shocks move freely like a nomal shock would. Thanx for any input.
 
It's normal for them to be alil "stickish". But mine moved without assistance from me , just had that sticking dropout, you may have some bind in your links. When charged and under weight on the trail they are extremely smooth.

Disconnect them and see if any binding through suspension cycle.

Sent from my PB99400 using Tapatalk
 
Try dropping both pressures but keeping the same psi between them. This may allow them to move more freely... i think RK had a issue with his and had to send one back but u may want to pm him for some more input.
 
Thanx for the input guys, I'll have to check the susp. for binds. It may be the currie joint on my lowers I remember them being really tight. I can jump up and down on the front end and compress it some tho.
 
Mine does the exact same...I can crawl in the rig and it wont even budge. Rock it hard, it will "unstick" and move like it should. Driving around, donuts and what not, it acts just like it should. But yeah I have the "sticking" as well. I haven't ran it on the trail yet, but I too was also intrigued.


No issue with flex, mines only noticeable when parked, and getting in or out of it.

I'm just waiting on Yager to get his bolted on so I can get an "educated opinion" : D
 
Mine does the exact same...I can crawl in the rig and it wont even budge. Rock it hard, it will "unstick" and move like it should. Driving around, donuts and what not, it acts just like it should. But yeah I have the "sticking" as well.

This is what I wanted to hear. Thanx. Mine are like a rocks when I get in and out of it also.
 
Back
Top