01ram4x4 Well-Known Member Joined Jun 29, 2007 Location roxboro Apr 23, 2011 #1 i was curiious is it possible to put 33x12.50s on a stock toyota
lilfoot Member Joined Apr 1, 2008 Location Marion,N.C. Apr 23, 2011 #2 Yeah but you cant turn deep. A 3" body does purdy good for 33s but you'll still rub in the front if you wheel it.
Yeah but you cant turn deep. A 3" body does purdy good for 33s but you'll still rub in the front if you wheel it.
dwgfd34 Well-Known Member Joined Aug 18, 2009 Location Lenoir, NC Apr 23, 2011 #3 cud turn torsion bars up a bit n clear. but takes away from ride quality.
cgm147 Well-Known Member Joined Feb 23, 2008 Location salisbury Apr 24, 2011 #4 i ran 32 1150's stock for 2 years and that about all i wanted to cram in there next i did a 3 in body lift and ran 33 1250 tsl and loved the look my next buy will be a dd with the same setup!
i ran 32 1150's stock for 2 years and that about all i wanted to cram in there next i did a 3 in body lift and ran 33 1250 tsl and loved the look my next buy will be a dd with the same setup!
92yotaman Active Member Joined Nov 5, 2008 Location boone, nc Apr 28, 2011 #5 had an 85 stock with 35s on it, worked just fine, some wheels spacers is all it needed to not rub when turning
had an 85 stock with 35s on it, worked just fine, some wheels spacers is all it needed to not rub when turning