TJ front coil spring/shock tower

rtj731

Active Member
Joined
Mar 23, 2009
Location
Fayetteville
All,
my daughter purchased a 97 TJ, it had been wrecked hit a tree head on, the PO repaired/replaced the front hood fenders ect.. However he didn't repair the front left coil spring/shock tower. It is bent rearward with the coil spring sitting towards the rear. Question is where could I purchase a new bracket? No problems cutting off the old and welding on new. Checked the frame looks OK, no cracks and the frame rail is straight. Looks like something hit just the spring coil bracket as it sits now the top of the coil rests against the shock. I tried to bend it back using my winch but it didn't budge. Any help on locating a new bracket?

TIA
J
 
Ballistic Fabrication sells a kit that may work for ya. Theirs is intended for coil conversions on leaf sprung rigs.

If it is only the tubular portion that centers the coil on the frame, you could always just weld in a piece of tube at the proper angle/location.
 
Back
Top