mtnbiker4evr13
Trail Whale
- Joined
- Sep 18, 2018
- Location
- Asheville NC
Have a ~96 1UZ out of an LS400 with stock transmission and a core AW4 that could give its tailshaft and 6 bolt tailhousing for easy atlas installation. Supposedly ran in a drift car, has wiring/ECU/air flow sensor etc.. I picked up some 100 series OE log manifolds that are included.
Got this on here a few years ago from an NC4x4 member to do a V8 toyota based buggy or swap in my 2nd gen crawler. But just had a 5VZ land in my lap and need to make room in garage.
I pulled plugs and sprayed fogging oil in before sliding into corner of shop.
$850 located in Asheville area.
Got this on here a few years ago from an NC4x4 member to do a V8 toyota based buggy or swap in my 2nd gen crawler. But just had a 5VZ land in my lap and need to make room in garage.
I pulled plugs and sprayed fogging oil in before sliding into corner of shop.
$850 located in Asheville area.