Toyota's running pane.

86yotarover

Member
Joined
Sep 29, 2011
Location
Forest City NC
I'm Fed up with the old wiring, and everything that goes wrong with it :D.

I need some tech info:

Gotpropane.com**22re kit**

I have a 86 std cab with a auto. *yes it's ifs but i'll wheel it till the ifs falls apart then sas. what all did you eliminate from the truck/runner. I need to keep all the lights *to please DOT* and pass inspections. main question is does the ECU have to stay in order for the starter,alt and lighting to work ? Not concerned about the gauges gps works better anyways. all I've found on yotatech, pirate are dead end no updated sites. tried advanced searches using google, altavista etc.

any help would be appreciated guys.
 
yep, he has both 22r and 22re kits. just wanted to see more in detail about what was deleted while installing the kit. my ecu is trashed, i bought the truck off a guy who bought it and was gonna fix it up. he knew nothing about it's history. after i got stuck in a bog on my last wheeling trip. undone some of the tape and looms to relocate stuff the wiring hardness is nearly a hack job. be easier to just get rid of the efi and go the pane route. got 2 places not even 2 mins from the house to fill tanks.
 
The thing you will have to check on is the CEL that is ran by the ECU. Im not sure if OBD1 has to have the CEL. I guess it really all depends on your inspection station.
 
Just quit now there is no hope.....Just kidding good to see you making progress
 
O I already gave up,Removed the whole dash then started unhooking and unclipping the wiring hardness.
like I'm gonna give up :rolleyes: wiring hardness is unhacked and uncut sitting in a box and ready for somebody who wants,needs it. even got my 3rd ditcher mounted

ai1218.photobucket.com_albums_dd418_tgrizzly4x4_2012_07_21_17_31_29_926.jpg

ai1251.photobucket.com_albums_hh552_yotawife2011_Offroad_20toy_DSCN0168.jpg


I do need someone who's better at wiring than i am. To help me wire up my starter,alt,lights and ingn. I've never seen the engine bay of a yota look so clean before. and wire in my Rail II shifter.
 
Last edited:
those of you running pane, did you setup your wiring from scratch? Right now my whole hardness is outta the truck. need some idea's on wiring up the Alt,Starter and I think i'll go with a switch and push button for ign. I'll leave out the lights till it's all running and driving. or any wiring guru's wanna help or school me on wiring those 3 up?
 
Back
Top