customjeepyj
Member
- Joined
- Feb 12, 2011
- Location
- Trinity
I have a 350 with tuned port. New 22lb injectors, new harness and computer from larry's electric, chip with vats removed, brand new blaster 2 coil, msd 6al, and msd pro billet dist P/N 8366. My # 7 cylinder is dead on the drivers side rear. I have tried 3 spark plugs and they all come out wet with fuel. I am getting spark through the wires and the spark plug. I have a pretty large vacuum leak in between # 3 and # 5 cylinder where the cold start inject is. It is plugged but seems to be not good enough. Could this cause a dead cylinder? I know the map and 02 sensors are reading incorrectly with this leak. I had a carb on it and it ran great. thanks