Tracking straight

[tacomatrd00]

I have a 2000 taco with a SAS and 63" rear spring swap, What is the best way to tell if it is tracking straight or if it is dog tracking. It drives straight other than a little wondering but its not chewing the tires up. I just noticed this the other day when I was pulling a trailer and it wasn't falling me true. I know I can use a tape measure but what is true on the rig? If it helps I have a hp44 with a 3 link in the front and stock axle in the rear, just different springs.

 

[BUCKEYE PERFORMANCE INC.]

cross measure axle to axle. and adjust your lower links untill its straight. and have u checked your caster that may be some of your wondering.

 

[tacomatrd00]

I measured and found my front axle was 3/8 off from straight and my rear is about 1/16 off. I can't move the rear without fab but I did move my front with the links. It rides better but still wonders so I am going to put it on the alignment machine next week and check the caster. Thanks for your help.

 

[BUCKEYE PERFORMANCE INC.]

glad that helped set the caster at 5 deg. and toe it in 1/8"