- Joined
- Aug 11, 2005
- Location
- Wilmington
I'm building the got trikes tubing bender, i had to buy 20 feet of the 5/8" flat bar, so while i was milling the arms i went ahead and made as many as i could using the leftovers
Anyone interested in buying the two 5/8" flat bar arms and the uprights all milled excactly to spec for $200 + shipping
All you need to do is weld up the frame and buy the die and ram
The plans are here if you don't know what i'm talking about
http://gottrikes.com/HD_Tubebender.htm
PM or email me performance_innovation@hotmail.com
Brendan
Anyone interested in buying the two 5/8" flat bar arms and the uprights all milled excactly to spec for $200 + shipping
All you need to do is weld up the frame and buy the die and ram
The plans are here if you don't know what i'm talking about
http://gottrikes.com/HD_Tubebender.htm
PM or email me performance_innovation@hotmail.com
Brendan