u-joint ?

[RocksUnlimited]

Not really a newb but I'm frustrated right now. I have used up all the 1330 joints I got from Tom Woods. Go to Autozone and napa and both give me the wrong size joints! Anybody know what part # and where I can get some? Thanks

 

[Roughshod]

No, but you can measure the diameter of the caps and the length of the cross with a caliper, then go to the parts store and just measure the joints they have in stock until you find the correct one. I've had to do that a couple times, I've never had a parts store tell me no. Keep in mind that if you have a crossover joint you may have two different sizes of caps and cross's on the same joint.

 

[Chris_M]

what was the napa part #? try napa # NPJ P354

also are you sure you need 1330? 1.06 x 1.06 Brg. Dia. x 3.62 x 3.62 Overall Width

the 1310 for reference are 1.06 x 1.06 Brg. Dia. x 3.22 x 3.22 Overall Width
and part# NPJ P369

 

[BUCKEYE PERFORMANCE INC.]

if your sure its a 1330 a 95 ford exploder has them on the rear drive shaft if that helps and most jeeps use 1310 but some odd mid 70s ford truck used a 1330/1310 cross joint.

 

[RocksUnlimited]

Thanks

Thanks guys. Yeah, its a 1330 conversion from Tom Woods. I have them sending me a few. I'll try the Explorer joint and see if it works tho.

 

[jeepinmatt]

Pay the extra for Spicer joints if you want them to last. The other brand parts store stuff is much lower quality.

 

[rockcity]

http://www2.dana.com/expertforms/demenu.aspx

 

[jeepn-jason]

Thanks guys. Yeah, its a 1330 conversion from Tom Woods. I have them sending me a few. I'll try the Explorer joint and see if it works tho.

If its a coversion joint 1310 to 1330 advance auto stocks them. They have a book for universal joints, just open it up and go to page 267. It will show the part numbers there. I know this cause i just went and got one sunday. If i can find the box ill get you the part number.

 

[drkelly]

Spicer p/n's: