Welding Table

I have a 2x3 table with 1/2inch thick top. I could use a bigger one sometimes but most the times the size is just fine. I built it that size because I only have a 20x25 shop and space is limited.
 
Mine is 4' x 6' the top is 3/8 framed with 3"x .25 angle with pretty a healty set of legs. It probably weighs 700 lbs. It's nice and solid and the top is perfectly flat. It's really good for laying out bumpers and what not.
 
R U referring to the one with the tablecloth on it?:flipoff2:
 
Back
Top