What I did this week

upnover

upnover

Grumpy, decrepit Old Man
Moderator
Joined
Mar 20, 2005
Location
Morganton NC
Photo368.jpg
Photo369.jpg
Photo370.jpg
Photo371.jpg
Photo372.jpg
cleaned one building. Built shelves in another
and made a screw driver holder
 
You will never find anything again!

Well done Chip, looks great.

I have always found when I keep my surroundings in order, my mood and mental stability follows suit.
 
If you get real bored, you can come to my house. I need a 360 pulled and a 440 installed. I need a cab switched over and some body work on the bed.

Looks good Chip
 
Jeff the fact is, it was so bad before I didn't bother to take any before pics! I couldn't find anything! I did however, find several things I didn't know I had.
The screwdriver holder I made was to replace the one I had. It was an antique Fuller screwdriver display. It had slots, but my bigger drivers had to be placed just right, because there were just so many of the wide slots. I had saw this kinda thing made from PVC somewhere, so I made it. seems to be working fine.
Those shelves were framed out with the 2X8's from the old deck on my trailer. I ripped some of them for the frame, and used some full width for one shelf. The other wide shelf was topped with some old oak boards I had from some shelves I had when I had my canopy. The narrow shelves I had to buy a piece of plywood $22 at sLowes, and I had to buy $6.30 in nails, plus my son gave me some nails too. So all total, I had less than $30 in the transformation to clustered mess to this.
I also roped my son into hauling off a bunch of junk to the dump. The middle shelving units were already in there, but was missing one support piece, I cut a replacement from some conduit.
The goal is to get all four outbuildings back in shape. I am slow, but whittling away at it
 
I saw it when you gave me the driveshaft slip yolk. Which worked perfectly by the way. Thanks again.
 
Back
Top