Which power steering pump do i need?

jmaner

Member
Joined
Jan 17, 2013
Location
Mooresboro NC
Kingpin dana 60 front with redneck ram hydro assist. converted to crossover steering. I think my pump is bad(no power steering at all). I want to replace it with the correct pump or at least the best that will bolt to my 1990 bracket on my tbi 350. Anybody have a part number for a good pump for my application?
 
If you don't mind spending the $$ I'd say PSC. What style pump is it?
 
Saginaw style pump. I put on a high volume/high pressure unit from the local auto parts last night. I think I found my problem. The ram had pulled the rod out of the piston. Stripped the threads out of it. Probably what caused the pump failure. It extends the ram fine but doesn't retract it.
 
Sounds like either a faulty ram or the PS box is drilled and tapped incorrectly. Unscrew both lines from the box and check to see that there is an open port down in there. I tapped a box one time and missed one of the ports and it never worked right.
 
Back
Top