maulcruiser
Well-Known Member
- Joined
- Aug 13, 2005
- Location
- Bladenboro/Wilmington, NC
I was doing some research on winch cables after calling a local company to have one made. They informed me the working load limit of the cable I will be using is 1,950 lbs. I was in disbelief! During my research, I came across this:
http://www.jeepforum.com/forum/f27/winch-cable-wire-rope-questions-answers-327031/
Start at post #3 and continue on. There's a lot of information you might have never known! It will make you be a little more cautious the next time you pull that cable.
I definitely learned something, so I figured I would share. Never hurts to be safe out there!
http://www.jeepforum.com/forum/f27/winch-cable-wire-rope-questions-answers-327031/
Start at post #3 and continue on. There's a lot of information you might have never known! It will make you be a little more cautious the next time you pull that cable.
I definitely learned something, so I figured I would share. Never hurts to be safe out there!