wj knuckles on xj d30

[offroadin 88xj]

Will the wj knuckle fit on my xj d30 if not Wat all has to be done to put them on

 

[pgaloustian]

Talk to cltdba I know he did it. Takes a little work if I remember right

 

[Jweezy]

i believe all you need are the parts(of course) and some brackets welded on... chris is in race prep mode so it may be a minute before he responds

 

[THE guyrock]

I've done several. I used 2000 Wj brakes and knuckles on the last one. I bought the IRO WJ brake kit for all of them. You need to space the unit bearing and caliper out 1/4" or so. Kit was $45. Then I got rotors from a 99 crown vic. And made DOM steering.

Tie rod needs to be about 52.5" and the drag link needs to be 34". I can take pictures if the one I just finished for you this weekend when I get back in my shop at home.

 

[userbmx1315]

The drag link may change some depending on lift. Was pretty simple.

 

[offroadin 88xj]

Alright thinks