yota 22r question

[**89mightymax**]

I have a 85 toyota its got a fuel injected head and block that's been converted back to carb. Still has a stock carb on it. Its been bored some with a set of longtube headers. What's a good aftermarket carb/ intake setup that's not very expensive without having to upgrade the cam and if I do whats a good combination of carb intake and cam setups? Its a 2wd truck so I wont be crawling or turning big tires. Just let me know. Thanks

 

[toyota1]

you really wont notice to much without a cam but for street a weber 38 and good sized cam

 

[**89mightymax**]

Whats a cam i can use without changing pistons

 

[flatbedtoy]

Check out engnbldr.com

 

[SFGator]

Check out engnbldr.com

Their 270 CAM should work good for street use.

 

[RatLabGuy]

Whats a cam i can use without changing pistons

most of them...

 

[**89mightymax**]

Another question... will my motor as it sits handle a weber 38? Or will it drown it out?

 

[toyota1]

38 should be great, i rode in 87 2wd with a header 277 cam and a 38 it actually had some get up and go, he had dual valve springs a little higher comp pistons and some porting too but still not very extensive mods at all for the power increase