Coronavirus project thread

When he asked if I wanted it for 20 I said yes and pulled a twenty from my wallet. One axle has breaks


Sent from my iPhone using Tapatalk
Can you weld them back together or is it too badly damaged? ;)
 
Coronavirus FID bench.

I figured a fun and useful project would be to try and build a FID bench using only what I have laying around since we are not supposed to leave home. I'm almost done with it.

IMG_20200325_093250.jpg
IMG_20200325_093807.jpg
IMG_20200325_093404.jpg
IMG_20200325_093217.jpg
 
I plan to cut a walking/ MTB trail around my property since most of my local forests have shut down.
But we're still working (essential business) and super busy. So I many not get to it until it dries up a bit
 
Got my front stair treads changed out today and damn what a pain. The way they were built almost caused me tear them down and start over. Had to sawzall the nails on the pickets where they were nailed into the treads. Also the bottom post for the railing was on top of the bottom tread. Cut out around that and got everything back together. Only took me about 4 hours then started pressure washing the house. That’s gonna take me a few days finish pressure washing everything.
532092D1-8EF3-4235-968B-E5800ADF3955.jpeg
46F85DC6-5F78-48B2-9CFD-6A8531EB03EB.jpeg
 
After finding a local that could patch the plaster and paint everything in our 75 y/o
fixer-upper (step-sons) at the 1.5 year mark, we've been hitting it pretty hard. Amazing how much it changed the look and got us fired back up (to get him out of our basement)! In the past 7 days... cement backer down in the kitchen, tile done in the "library", all receptacles/outlets swapped & covered and 3 of 8 light fixtures up...
20200314_190954.jpg
20200321_192525.jpg

Next up... shitter and kitchen cabinets
 
After finding a local that could patch the plaster and paint everything in our 75 y/o
fixer-upper (step-sons) at the 1.5 year mark, we've been hitting it pretty hard. Amazing how much it changed the look and got us fired back up (to get him out of our basement)! In the past 7 days... cement backer down in the kitchen, tile done in the "library", all receptacles/outlets swapped & covered and 3 of 8 light fixtures up...
View attachment 314795 View attachment 314796
Next up... shitter and kitchen cabinets
Second picture threw me. I was like WTF is he doing to that wall?
 
Did it come from Fuller?
Nope, if it did it would look more like this bahaha.
Well here was my "coronavirus" project few weeks ago...yes that just happened to those who don't believe lol
IMG_20200318_083406.jpg
 
IMG_20200311_181923.jpg
 
make fun all you want, lol. This is "Crusader"...a $1800 1 Ton rig, 40s, homemade doubler (which mind you has taken ALL the rev limiter I ever thought possible lol), 4 link rear, 3 link front, full hydro steering, cage now, full skid, boat sides, 140K mile original motor/trans, pretty much all built from scrap metal minus the things You "have to" buy...You just can't get any better than $1800 on a so far, very dam capable crawler. Sucks on high rev applications (obviously lol) but crawls up and over anything!! Can't wait to hit some real trails!!!
 
how the hell do you get in and out? You must be shaped like Gumby
didn't feel like doing door so I just made that section to crawl through...my knees don't like the bend but lucky it's pretty low to the ground considering so not too bad
 
make fun all you want, lol. This is "Crusader"...a $1800 1 Ton rig, 40s, homemade doubler (which mind you has taken ALL the rev limiter I ever thought possible lol), 4 link rear, 3 link front, full hydro steering, cage now, full skid, boat sides, 140K mile original motor/trans, pretty much all built from scrap metal minus the things You "have to" buy...You just can't get any better than $1800 on a so far, very dam capable crawler. Sucks on high rev applications (obviously lol) but crawls up and over anything!! Can't wait to hit some real trails!!!

When you going to Harlan, Windrock and such? You’ve came a long way, it’s time you started doing some real wheeling
 
Nope, if it did it would look more like this bahaha.
Well here was my "coronavirus" project few weeks ago...yes that just happened to those who don't believe lol
View attachment 314829
You really need a tube bender. Just to keep things civil, I am not going to mention what my wife said. As they say, wheel what you got. Better than not wheelin at all, I think.
 
When you going to Harlan, Windrock and such? You’ve came a long way, it’s time you started doing some real wheeling
I'm trying to plan Harlan in the Fall...that's my dream trip and this rig is built for a place like that
You really need a tube bender.
I have one lol, just didn't feel like taking time to make it fancy. I built a really nice cage for a member here with it but on this pile of scrap metal, figure why bother lol. Plus I like the looks of this, I'm different and I like my rig to be different and look different than any thing else so I like the look of it and believe it or not, so does most everyone that has seen it...
 
I'm different and I like my rig to be different and look different than any thing else and believe it or not, so does most everyone that has seen it...

you have accomplished your goal for sure, congrats! Unfortunately though, I am in the not category, but that is what makes the world go round. Hope to see it on the trail.
 
Back
Top