Recentering H1's

[GONOVRIT]

Who all in NC can do it? My rig won't be on the street much at all but I would like to get the wheels straight as possible. I don't see it but I've been told its hard to do.

 

[paradisePWoffrd]

Im pretty sure that Andy has done a set or 2...

also IIRC JeepinMatt recentered his own, and he drives it on the street without much issue...

 

[drkelly]

John welded his centers in, and as you know he drives it on the street. Jim would probably do them for you.

 

[GONOVRIT]

John welded his centers in...

I think thats all the motivation I needed to do it myself

 

[Down&Dirty]

They are easy to do. I didn't work to hard to square mine up though. If I were to do it again I would just put three tacks around the ring in a triangle. Then mount them to the hub. Setup a dial indicator on the axle housing and measure for any wobble. Hit with a hammer and repeat until I was happy. Add Some tacks and remeasure. Then weld them solid.

 

[jeepinmatt]

I can do it at my shop, and Im in Dallas. Im running my 12 bolts with runflats, and 10ply 38" SXs, haven't had them balanced yet, and I can get up to a little over 60mph before things start to vibe. What type of centers are you wanting to use, pressed or flat? PM me if you're interested and we can work something out.

Also, I can spin balance tires if the combo is 150lbs or less.

 

[GONOVRIT]

Thanks for the info guys. Matt I'll get in touch with you.

 

[BIGWOODY]

I have a set of 4 h1's $100 if you're interested.

 

[GONOVRIT]

Thanks Greg but I've already got mine.