High Steer setup on SD60 in my MJ

Scott86MJ

Scott86MJ

Well-Known Member
Joined
May 3, 2006
Location
Dallas
I'm needing help with what steering to order. I'm planning to order Superduty Dana 60 Heim Joint Steering Kit with 7/8 Heims
but im not sure which weld on high steer to get regular or crossover Weld On High Steer Arms 2005-2008 Superduty Dana 60
barnes4wd.com

2005-2008 Ford Superduty Dana 60 Weld On Crossover High Steer Arms

If you are looking to add cross over steering, and high steer to your 2005-2008 Superduty Dana 60 axle this kit has all of the parts you will need. The high steer arms in this kit will also accommodate most full hydraulic and hydraulic assist steering systems as well. If setting up traditional...
barnes4wd.com barnes4wd.com
 
Scott86MJ said:
I'm needing help with what steering to order. I'm planning to order Superduty Dana 60 Heim Joint Steering Kit with 7/8 Heims
but im not sure which weld on high steer to get regular or crossover Weld On High Steer Arms 2005-2008 Superduty Dana 60
barnes4wd.com

2005-2008 Ford Superduty Dana 60 Weld On Crossover High Steer Arms

If you are looking to add cross over steering, and high steer to your 2005-2008 Superduty Dana 60 axle this kit has all of the parts you will need. The high steer arms in this kit will also accommodate most full hydraulic and hydraulic assist steering systems as well. If setting up traditional...
barnes4wd.com barnes4wd.com
Click to expand...
So I’m a newbie to this but my advice is to figure out what year axle you have. Then you can decide what to do. Barnes lacked options and was OOS so I got weld on high steer stuff from TMR. I had it delivered in about 5 days.

I guess the knuckles have different shapes based on years. I haven’t done anything with my parts, but the fact that TMR had options for different years provided a degree of assurance.

What I received from TMR looks well designed and solid. Time will tell. If it matters my axle tag was 2013.
 
frankenyoter said:
So I’m a newbie to this but my advice is to figure out what year axle you have. Then you can decide what to do. Barnes lacked options and was OOS so I got weld on high steer stuff from TMR. I had it delivered in about 5 days.

I guess the knuckles have different shapes based on years. I haven’t done anything with my parts, but the fact that TMR had options for different years provided a degree of assurance.

What I received from TMR looks well designed and solid. Time will tell. If it matters my axle tag was 2013.
Click to expand...
Mine is a 2008 per @Noel
 
Back
Top