What cooler for hydro steering do you guys use?

spraypaintman

spraypaintman

Well-Known Member
Joined
Mar 21, 2005
Location
Kernersville
I saw a few out there 12" and 24" finned coolers for full hydro steering. What works for you guys?
 
Oh really... I'll have to check if I have room for that.
 
Chip is that a $30 cooler you use?

Any other options from the full hydro guys?
 
yes it is. It's what I used for the assist, and now for the full hydro. so far it has worked just fine, no issues with getting hot. A reservoir for extra fluid helps a lot too.

IF you don't have room in front, I have seen many plumbed to the back or underneath with their own fan. I use the underneath for my tranny cooler.
 
I'm running a advance auto cooler like Chip is talking about as well. Seems to work fine so far. The free flow heat sink cooler works well and isn't any harder to plumb in if you're having to make new lines.
 
thanks for the info guys....:beer: where did you guys buy the free flowing heat sink coolers?

I saw summit had this one for $60
astatic.summitracing.com_global_images_prod_large_der_13250_cp.jpg
 
^^looks just like my PSC cooler,pick mine up at Rides...brandon may have one on the shelf call him 828-465-3800
 
What size cooler do you have?
 
You guys call it what you want, I'm pretty sure it's my Flux Capacitor :flipoff2:

Mines by Howe Performance $60 from Carolina Truggies 704.684.5618 :beer:

ai1081.photobucket.com_albums_j346_CAROLINATRUGGIES_photo.jpg
 
Do you guys ever install the cooler in the engine compartment?
 
Back
Top