3D PRINTING

frankenyoter said:
Might be a dumb question but did you remove all of the packaging screws and foam etc that comes packed with?

Our H2D has operated flawlessly for a couple months and several spools of filament. Everything from complex multi color stuff to a Batman mask for a large dog. Once I get time I’m going to set up a window vent system and try some one piece pteg 1:10 RC crawler bodies. Need to try to make one for the slash too, that thing takes a beating.
Click to expand...

Yeah, I haven't found any other packaging material inside.

Ultimately, I ended up splitting the model into separate parts rather than trying to print a bunch at once. That worked fine. I'm suspecting it was likely more of a model problem than a printer problem at this point.
 
Macdaddy4738 said:
Yeah, I haven't found any other packaging material inside.

Ultimately, I ended up splitting the model into separate parts rather than trying to print a bunch at once. That worked fine. I'm suspecting it was likely more of a model problem than a printer problem at this point.
Click to expand...
So you don't have this problem with other models that are tall?
 
Back
Top