99 Frontier, mog 9s, doubler, atlas 4spd, 40s, blah blah blah

[sharksanddanger]

I picked this truck up this past January and have been slowly collecting parts to build it. The plan is a 99 KC frontier on 406mog 9s on 40s. 14" coilovers in the front with either a 3 or 4 link(I haven't quite decided yet) and I'm going to do a 1 link out back with either 14" or 16" coilovers. I also have a nissan supercharged V6 to go into it and will be running a 5 speed behind it with an atlas 4 speed t-case. I've got an m8000 to go in the back and a m12000 to go in the front.

I've still got a lot of parts to get so this build isn't going to go real fast so I figured I'd start a build up thread before it gets lost in time.

Here is the truck that I bought, motor was knocking.

Inside looked real rough!

Did a little herculining on the body, inside the cab and bed. Welded some sliders on.

 

[sharksanddanger]

Here are the 406 mog axles. They have 6.52 gears and air lockers but I'll be using 9" centers and the mog outers due to a very expensive chipped pinion.

Mog axle shaft, 50 degrees of steering

NWF dual t-case adapter, very bling.

 

[sharksanddanger]

My aluminum fairlead for my rear winch

I got the tranny, t-case, and NWF adapter mated up.

Then I put some headers on the SC motor and got it mounted up.

 

[sharksanddanger]

I added a 1" BL but I'll have to cut the hood a little bit so it clears the SC pulley.

Back view with the NWF adapter in and mounted..

Floor cut

 

[sharksanddanger]

Atlas flat like I like my... wait, no I don't.

Floor cover that we built.

 

[sharksanddanger]

Picked up some 40" Xterrains. Right now its at 21" under the frame but I would like to be somewhere around the 25-27" mark but we'll see.

 

[sharksanddanger]

Plated the frame in the rear to stiffen it up a bit, then built a winch mount.

 

[CTRaceWorx]

Looks good! Ill keep an eye on this build. Let me know if you need anything.

 

[sharksanddanger]

Welded up in the rear.

 

[sharksanddanger]

 

[sharksanddanger]

Looks good! Ill keep an eye on this build. Let me know if you need anything.

Thanks! Will do. I've got a lot of parts to buy still.

 

[chromerunner]

< jealous...

 

[jeepn-jason]

sumthing about you deere guys and your perfect welds! one of the days ill be able to do that......probably not. lol Truck looks good, kevin was tellin me about it.

 

[jeepinmatt]

Should be quite a beast. Beautiful welding also.

 

[93redzj]

dems some purdy lookin welds......looking good!

 

[Copasetic]

Very nice! It's cool to see someone doing something different. And I agree also, the welds are very sexy!

 

[houdini]

Nice fab work Richard! Looking forward to seeing this build come together.

 

[01blktaco]

looking forward to seeing how the one link does. I debated putting a one link in the back of the jeep for a while.

 

[Reid]

damn you build some cool trucks

 

[rockcity]

nice

 

[sharksanddanger]

Received the cable shifter for the Atlas from NWF yesterday and put them in today. I was really happy to see that they fit, I was worried they weren't going to clear the Nissan t-case and NWF adapter.

 

[JonathanS]

[/QUOTE]

man that is sweet looking winch you got there

 

[sharksanddanger]

Started the bed bob tonight. I'm taking about 19.5" out of it.

 

[sharksanddanger]

 

[1stgenxxx]

this is a sick build