BCF Shop

Stuntman Autoworks said:
Shop is fully installed. Now to clean and seal the concrete, get some insulation and interior walls and run some electrical. I also need an amazing amount of rock to go around it, but chipping away at everything a little each day.
View attachment 459073View attachment 459074View attachment 459075View attachment 459076View attachment 459077
Click to expand...
Do plenty of research on the concrete sealer before you pull the trigger. I used spec chem cure and seal and buggered it up. My sprayer didnt atomize well enough and it was splotchy as all get out, like little puddles everywhere. I ran back over it with a roller to smooth it out but it came out orange peel texture instead of slick. It didnt seem to penetrate the dried concrete even though the label said it should. 1 drop of gas will eat it right off. My buddy used the same product on his shop floor and has had the same experience. He poured a second pad and applied it when the concrete was still green and it soaked it right up and looks great.
 
Im using this to seal with, from the research I've done it seems like it will be good and the industrial floor company that was at work recommended it for my application.

prosoco.com

Consolideck LS/CS – PROSOCO

Consolideck LS/CS is a penetrating silicate treatment that hardens, densifies and dustproofs concrete floors.
prosoco.com prosoco.com
 
Back
Top