orange150
Well-Known Member
- Joined
- Mar 20, 2005
- Location
- Fairfax City, VA
Chainsaws
- Thread starter Ron
- Start date
- Joined
- Mar 24, 2005
- Location
- Stanley, NC
That is one of the coolest, most useless saws I've ever seen. I'd love to have an 090 though.
StretchASU
Playing country music til Troy's ears bleed.
- Joined
- Oct 17, 2006
- Location
- Claudville, VA
That dude has a chainsaw haven at his place. Not sure if that one came from the junk auction in Mount Airy the other week or not but there was one in a mixed lot.
Shreddinlettuce
Well-Known Member
- Joined
- Nov 20, 2016
- Location
- Hickory
Anyone got one of these stihl nock off saws from holzfforma chainsaw? They look like 2000 era stihl and are parts compatible so they say….
The g660 has my eye, if any small parts break I could replace with stihl parts
www.farmertec.com
The g660 has my eye, if any small parts break I could replace with stihl parts
Holzfforma Brand - Quality Chainsaws & Parts | Farmertec
Experience the exceptional quality of Holzfforma chainsaws and parts. Farmertec's commitment to reliability and efficiency is evident in our Holzfforma line.
NCJeeplover
Well-Known Member
- Joined
- Jul 25, 2009
- Location
- Claremont, NC
Anyone got one of these stihl nock off saws from holzfforma chainsaw? They look like 2000 era stihl and are parts compatible so they say….
The g660 has my eye, if any small parts break I could replace with stihl parts
Holzfforma Brand - Quality Chainsaws & Parts | Farmertec
Experience the exceptional quality of Holzfforma chainsaws and parts. Farmertec's commitment to reliability and efficiency is evident in our Holzfforma line.
Maybe @89wrangler could tell us how his saw is doing?
The guys who have done well with them are the guys that totally disassemble them and clean them well, replace some critical parts with OEM and carefully assemble.Anyone got one of these stihl nock off saws from holzfforma chainsaw? They look like 2000 era stihl and are parts compatible so they say….
The g660 has my eye, if any small parts break I could replace with stihl parts
Holzfforma Brand - Quality Chainsaws & Parts | Farmertec
Experience the exceptional quality of Holzfforma chainsaws and parts. Farmertec's commitment to reliability and efficiency is evident in our Holzfforma line.
The guys who blow them up in days are the same guys who gas em up and run the
out of em like LEEERRROOYYYY JEEEENNKKINNNNSS
Shreddinlettuce
Well-Known Member
- Joined
- Nov 20, 2016
- Location
- Hickory
I’m in the latter group usually, just ordered one with 28 inch bar for $400 shipped with an extra chain. I might pull the plug and inspect, but I doubt I’ll tear down at first, will attempt to break in correctlyThe guys who have done well with them are the guys that totally disassemble them and clean them well, replace some critical parts with OEM and carefully assemble.
The guys who blow them up in days are the same guys who gas em up and run the
ghost
Well-Known Member
- Joined
- May 25, 2006
- Location
- Hartsville/Camden,SC
We are in it now… son suggested we do the crank bearings while we are in there.
ghost
Well-Known Member
- Joined
- May 25, 2006
- Location
- Hartsville/Camden,SC
So we decided to try and reassemble since he felt they were good bearings. Unfortunately the shitty gasket came apart when I tried to remove it.
https://www.ebay.com/itm/235962762437 SO I'll try and find a Stihl gasket.
https://www.ebay.com/itm/235962762437 SO I'll try and find a Stihl gasket.
89wrangler
Not a new member
- Joined
- Oct 22, 2005
- Location
- Bostic,NC
Still going strong! I have the Neotech version. I did change to an Stihl chain adjuster and put a high volume oiler in it. It starts right up and cuts great. I ended up buying their 12” version and tractor mount for limbs and smaller stuff. I wish I had done it years ago as I have used it a lot while doing all of this cleanup. Nothing bad to say about the ones I bought. Great value.