Project RustRunner..... #pushpullsteering #nolift35s

Progress has been slow i noticed i fell to page 6 or something like that so its time so do a couple things. Has some parts and what not laying around as im heading up to URE next weekend so what better time to rebuild your front axle after not doing shit to it a month or so.

What fvcing junk those old u bolts and plates are. Seems all the old plates are good for is collecting shit.

yh8Qozs.jpg


Hired some child labor to clean up. Thats just too below me to clean and shit. #metoobooshy

W3aDrii.jpg


got her all torn down and whatnot. As you can see its not really all that clean but come to find out 1.39 per can dollar general gloss black sticks to the dirt better and keeps it from running.

qLcUDUG.jpg


Thank the child labor for snapping this gem. When you work in shorts and flip flops you have to scrub the feet and legs or the wife threatens castration. Dem legs doe mmmmmmhmmm. Sex on two legs right there.

3CJpxCa.jpg


Called my fab guy/ only guy i know that loves beer as much as i do @RHSCTJ to run the ole metal joining machine since well im awful at it. Plain and simple. Hes sexier in the helmet IMO.

bmZZh8I.jpg


alight boys get read to blame it on the pleats here comes the parts porn. Got these trick brackets from Front Range to run Taco brakes. Throw the lock washers away if you buy this kit they are no match for a bump of the ole thundergun. The brackets are nice doe. Look nice and strong like Bill Cosby's ability to sleep with womens. Now when i grenade a birfield i will not have to fvck with the wheel bearings and all that shit.

i8gOsPF.jpg


ARP studs and sloted Fleabay rotors. Nothing could be more race car than that.

Z3RzQ27.jpg


Got her all buttoned up. Decided to replace the tie rod ends while i was at it. Found some really old Moog shit on Fleabay for like 15 bucks so fvck it. Couldnt hurt i reckon. Dont forget the hashtags. #nolift35s #pushpullsteering

fnCAbFD.jpg
 
Progress has been slow i noticed i fell to page 6 or something like that so its time so do a couple things. Has some parts and what not laying around as im heading up to URE next weekend so what better time to rebuild your front axle after not doing shit to it a month or so.

What fvcing junk those old u bolts and plates are. Seems all the old plates are good for is collecting shit.

yh8Qozs.jpg


Hired some child labor to clean up. Thats just too below me to clean and shit. #metoobooshy

W3aDrii.jpg


got her all torn down and whatnot. As you can see its not really all that clean but come to find out 1.39 per can dollar general gloss black sticks to the dirt better and keeps it from running.

qLcUDUG.jpg


Thank the child labor for snapping this gem. When you work in shorts and flip flops you have to scrub the feet and legs or the wife threatens castration. Dem legs doe mmmmmmhmmm. Sex on two legs right there.

3CJpxCa.jpg


Called my fab guy/ only guy i know that loves beer as much as i do @RHSCTJ to run the ole metal joining machine since well im awful at it. Plain and simple. Hes sexier in the helmet IMO.

bmZZh8I.jpg


alight boys get read to blame it on the pleats here comes the parts porn. Got these trick brackets from Front Range to run Taco brakes. Throw the lock washers away if you buy this kit they are no match for a bump of the ole thundergun. The brackets are nice doe. Look nice and strong like Bill Cosby's ability to sleep with womens. Now when i grenade a birfield i will not have to fvck with the wheel bearings and all that shit.

i8gOsPF.jpg


ARP studs and sloted Fleabay rotors. Nothing could be more race car than that.

Z3RzQ27.jpg


Got her all buttoned up. Decided to replace the tie rod ends while i was at it. Found some really old Moog shit on Fleabay for like 15 bucks so fvck it. Couldnt hurt i reckon. Dont forget the hashtags. #nolift35s #pushpullsteering

fnCAbFD.jpg

Pretty sure you need to swap those calipers. The FROR brackets move the calipers to behind the axle instead of the front. If you put the driver one on the driver side, the bleeder is now on the bottom and won’t bleed the lines properly. Ask me how I know...
 
Pretty sure you need to swap those calipers. The FROR brackets move the calipers to behind the axle instead of the front. If you put the driver one on the driver side, the bleeder is now on the bottom and won’t bleed the lines properly. Ask me how I know...
He figured it out
 
Pretty sure you need to swap those calipers. The FROR brackets move the calipers to behind the axle instead of the front. If you put the driver one on the driver side, the bleeder is now on the bottom and won’t bleed the lines properly. Ask me how I know...
Yeah I figured that out during the reassembly process. I followed the R and L on the calipers then proceeded to feel like a complete dumbass. Clear Leigh we have something In common.
 
Yeah I figured that out during the reassembly process. I followed the R and L on the calipers then proceeded to feel like a complete dumbass. Clear Leigh we have something In common.

That makes you smarter than me. I had someone call me a “dumbass” and then it was explained to me. I’ll never forget it now.
 
Back
Top