Random pic thread.

[rodney eppes]

I appreciate the dude, parking up on the curb! No way his door could hit mine, or mine his. Or, maybe he just followed His GPS.

 

[rodney eppes]

I reached the job before the contractor, this morning. I was instructed to dump close to the concrete, & leave room to dump dirt. Nailed it!

 

[RatLabGuy]

 

[mommucked]

 

[jeepinmatt]

I appreciate the dude, parking up on the curb! No way his door could hit mine, or mine his. Or, maybe he just followed His GPS.

Man, if I had some yellow tape...

 

[Wes]

2010 5.4 3 valve out of my dad’s F150. She gone. No warning. Just a metal “clank”. Found part of a valve and stem in the intake. It had about 190,xxx.

 

[jeepinmatt]

2010 5.4 3 valve out of my dad’s F150. She gone. No warning. Just a metal “clank”. Found part of a valve and stem in the intake. It had about 190,xxx. View attachment 382240View attachment 382241

So you're doing a 7.3 swap now, right?

 

[awheelterd]

So you're doing a GODZILLA swap now, right?

Fify

 

[jeepinmatt]

Fify

Ya know, I originally typed it up as Godzeeeeya, but changed directions before I hit post.

 

[Wes]

So you're doing a 7.3 swap now, right?

I wish. Pop ordered an OEM replacement. It’s in and we’re riding as I type. Running good

 

[benmack1]

 

[benmack1]

 

[mommucked]

Saw this sweet FJ 40 yesturday ....

 

[Jody Treadway]

Found this gem today
Slickrock trail at Tellico, early 2005
Me and my buddy rolled in to Crawford's Friday night around 9:00. Steve walked out of his house, shook his head and said "y'all some dumb asses. Too cold to wheel" and walked back inside.
One of us actually slept in the bath house that weekend cause it had a heater. I plugged in my electric blanked and wrapped up like a mummy in my tent.

 

[Tom@Hilltop_Machine]

 

[RatLabGuy]

View attachment 382305

I really have to wonder how many people push this button.

 

[jeepinmatt]

I've seen a lot of interesting things in the machining world, but this is a true microtool:

0.08mm Endmill (0.0031", Three thou and 1 tenth)


@Andy J. @Tom@Hilltop_Machine @justjeepin86 @jeepcj3a @braxton357 @Croatan_Kid

 

[orange150]

Finally found something small enough to make your own fleshlight huh

 

[jeepinmatt]

Finally found something small enough to make your own fleshlight huh

Yep, 4th pic down. Been using it for years.

 

[braxton357]

I've seen a lot of interesting things in the machining world, but this is a true microtool:
View attachment 382319View attachment 382324View attachment 382323View attachment 382321View attachment 382320View attachment 382322
View attachment 382317

0.08mm Endmill (0.0031", Three thou and 1 tenth)


@Andy J. @Tom@Hilltop_Machine @justjeepin86 @jeepcj3a @braxton357 @Croatan_Kid

It's that last tenth that gives it all the strength

 

[shelby27604]

I've seen a lot of interesting things in the machining world, but this is a true microtool:
View attachment 382319View attachment 382324View attachment 382323View attachment 382321View attachment 382320View attachment 382322
View attachment 382317

0.08mm Endmill (0.0031", Three thou and 1 tenth)


@Andy J. @Tom@Hilltop_Machine @justjeepin86 @jeepcj3a @braxton357 @Croatan_Kid

Are you doing some gas chromatography? I used those back when I was building a machine to make Ferrell's. Those were some expensive end mills!

 

[CLRracer]

Vinyl is done, drywall done. Trim and septic next week, landscaping and paint right behind. Getting closer!

Duane

 

[jeepinmatt]

Are you doing some gas chromatography? I used those back when I was building a machine to make Ferrell's. Those were some expensive end mills!

Nope, it's a customers. Not sure what they're using it for. We will figure it out after they tear something up with our 80k rpm spindle

 

[justjeepin86]

I've seen a lot of interesting things in the machining world, but this is a true microtool:
View attachment 382319View attachment 382324View attachment 382323View attachment 382321View attachment 382320View attachment 382322
View attachment 382317

0.08mm Endmill (0.0031", Three thou and 1 tenth)


@Andy J. @Tom@Hilltop_Machine @justjeepin86 @jeepcj3a @braxton357 @Croatan_Kid

I always thought it was crazy that Harvey sells .001" end mills. We have some .01" in the drawer, but not that small.

 

[ManglerYJ]

View attachment 382233

I'm guessing "timeliness" ?