Which one of you did this?

[paradisePWoffrd]

IDK but I’d love to have that little ford tractor! That’s exactly the size I’m looking for!

That's not too little of a tractor, given that it is lifting a 1500lb mower. But youre right, it is a nice size.

 

[Jeff B]

 

[RoosterRash]

I could just see some old redneck dude standing under there with an angle grinder sharping the blades....

It’s very possible it was in Wilkes Co where I seen it

 

[YotaOnRocks]

View attachment 325209

Doesn't seem like the easiest way to make a Z cut in the frame.

 

[Jeff B]

 

[jeepinmatt]

View attachment 325457

Wasn't me. I used a Chick-fil-A cup

 

[LT1JEEP]

I don't have any pics but i used paint mixing cups and water clamps on my 30ft trailer been like that for 10 years now just change the cup when they dry rot. Never could find the right grease caps to put back on them.

 

[Jeff B]

 

[GotWood]

View attachment 326041

Bumper sticker says it all.

 

[shelby27604]

When you need to tow a rig down hill without a helper, sometimes you have to improvise.
Needless to say, I was glad I brought my pintle hitch!
Fwiw, that hitch started out centered.

 

[Jeff B]

 

[Tom@Hilltop_Machine]

Nice fit up.

 

[CasterTroy]

 

[scrubber3]

View attachment 327875

Best use of a wrangler I've ever seen.

Sent from my SM-N986U using Tapatalk

 

[jeepinmatt]

View attachment 327875

There's a tremendous mix of thoughts and emotions occurring in my head at the sight of that picture.

 

[paradisePWoffrd]

delete the flares, remove the top and chop the windshield; and it might not be as bad.

 

[benmack1]

There's a tremendous mix of thoughts and emotions occurring in my head at the sight of that picture.

I had two thoughts. 1) put it back up on the jack stands? Or 2) burn it.

 

[scrubber3]

There's a tremendous mix of thoughts and emotions occurring in my head at the sight of that picture.

You think it looks good that in turn makes you feel good?

Sent from my SM-N986U using Tapatalk

 

[jeepinmatt]

So I found out the tie rods are good, the pitman arm has some slop in the joint and the shaft seal is leaking.Gona fix it sat.Pull the box and put new seals in it and put this HD pitman on.View attachment 332077 until then, I put a bandaide on it.
View attachment 332078

took it for a drive and the zip ties made a difference.

I'm just saying....

 

[Scooter402]

View attachment 327875

Executed a little differently, I might drive the shit outta that... just like some others said - ditch the flares, narrow the rear (to tuck the tires in), narrower front wheels/wms width, and something different with the exhaust....I'd run it.

 

[ncsutj]

Sent from my SM-G960U using Tapatalk

 

[adamk]

Sent from my SM-G960U using Tapatalk

Bet he did that out of boardom

 

[CasterTroy]

Bet he did that out of boardom

You wood go there

 

[rcalexander105]

Bet he did that out of boardom

You wood go there

Dad jokes for days

 

[scrubber3]

Found this on another forum.