Koup's 94 Toyota Truggy Build

stinkbomb

Well-Known Member
Joined
Dec 10, 2009
Location
Rougemont, NC
Figured since I'm now part of the NC community, I'd share my build thread on here. It's a pretty basic buildup, with just a slight overkill on most parts.

Build:
-94 4wd pickup cab, 22re, W56, duals with a Marlin adapter, all 21 spline
-92 2wd pickup frame, stripped completely
-RUF bastardized leaf packs, hung by a homemade hanger
-Double triangulated 4 link rear with dovetailed frame and TJ front coils
-85 front housing, V6 third, Detroit, Longs, Long hub gears, FJ80 rotors
-No idea what year rear housing with shaved drain plug and a welded V6 carrier in a 4cyl third
-4-dee inch iroks on Beadlocks
-Summit 12 gallon fuel cell, emptied by a Ford E2000 pump
-Sliders frenched into rockers
-Gnarly ass spider gear shift knob
-5 sticks of tube bent into the mix with toolbox, cooler and dry goods bin storage in the back
-Warn 9000 on the front bumper
-battery relocated to next to fuel cell with a dash mounted master kill switch


From October 24, 2011 until the Wednesday may 23rd, I worked pretty much around the clock 5-6 days a week. Worked 730-5 every day, then off to the shop until 2am, which towards the end, turned into 3-4am. Then a few weekends throughout the summer to get it to where it is now

I'm being a dousche and linking the thread from Pirate, mostly because there's a million pictures and halfway through the build I started using Photobucket and all the previous pictures were uploaded from my laptop, which is dead. But you don't have to join or register to read it, but be warned, it is PICTURE HEAVY! And overly in depth.

Enjoy:

http://www.pirate4x4.com/forum/toyo...s-94-reg-cab-build-38-5s-duals-links-etc.html
 
Last edited:
I followed your build on pirate and always loved it. Where about in Raleigh did you move to?
 
this may have gave me new direction for my rig this thing is my new insperation
 
Awesome build thread. So when ya gonna link the front?
 
I followed your build on pirate and always loved it. Where about in Raleigh did you move to?

Thanks. In the Brier Creek area, for now. Convenience is nice, but I miss my seclusion.

Nice man. I,m in youngsville, 25 min north of Raleigh. Let me know when you go wheeling

Good deal, possible plan to the flats the weekend after New Years, but that's still up in the air. I'll keep ya in mind

Awesome build thread. So when ya gonna link the front?

I'd like to link the front now, but she's gonna stay the way she is for a while. Next winter it'll go under the knife. Possibly later this winter if I get a wild hair up my ass, but who knows haha
 
This might be an odd question but how long can you run on 12 gallons of fuel on the trail? Kinda of wondering what size to go with in the runner.
 
Wheeled 2 whole days at Rausch in July, on one tank. Some of the day was spent at camp fixing a buddy's buggy, but we covered a LOT of ground that weekend. Same with Gore, VA, ran the whole weekend(which included dumping a shit ton of gas out of my vent the first night there on a night run), one day was also only about 2 hours of wheeling. With a 22re you'd be surprised at how little it uses on the trail vs on the street. 12 gallon cell and keep a 5 gallon jug in the tow rig, saves you space and weight.
 
Haven't updated in a while, some of this is really old(and copied from my Pirate thread)

I moved my ram mount to the front of my front axle and put some tube in front of it and took a leaf back out of my front leaf pack. now sits 23.5" to the frame on 40s, at 8 psi, run 3 psi all around on the trail.
ai895.photobucket.com_albums_ac151_kouperstein2_truggy_20build845904846091426b6b3544bb6779d43f.jpg

other than that, here's a few pics from Harlan Fall Crawl 2013. Girlfriend wanted to drive it, so I put her in the seat in lower rock garden
ai895.photobucket.com_albums_ac151_kouperstein2_Harlan_20Fall_4d95fdb228112d44da53f616406f0427.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Harlan_20Fall_9894196e8216a83d0d90d302a006b591.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Harlan_20Fall_19fba6ecffa87dfbfa197f6a910712f1.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Harlan_20Fall_de0a1f00da063073b68922ee98499ec1.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Harlan_20Fall_2c7390a19e8f6e73a5f7b1ce5c5340de.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Harlan_20Fall_07f2a8b87b4bff8ca0791420e89d0bda.jpg

Before she got into the part where I was actually going to have to spot her a little, I stopped her, said something broke in the front, shut it off and get out. She thought she really broke something, but I just wanted to ask her to marry me!
ai895.photobucket.com_albums_ac151_kouperstein2_Harlan_20Fall_4805f191f41c4355079e06e01477916a.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Harlan_20Fall_450454f1d429269cb703c8677f7c95e9.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Harlan_20Fall_ee26f907ad442e65487e087b4df06b15.jpg


The rest of the pics that I took at Fall Crawl, can be found here:

http://s895.photobucket.com/user/kouperstein2/library/Harlan Fall Crawl 2013
 
Otherwise, I started the next phase of the build, time for a remodel.
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod6b8a396dd9a397b1cd43cd91c5a9bbd4.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodac1b646ff7eac02d21c358a03fe91748.jpg

pulled seats and harnesses
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod9b0f85e7611b6e76621e2eb3608a8726.jpg

made some incisions
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod5e687042b2e01baba4c8b37923a1f537.jpg

tube removal
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod1d43f1e20df9e6c1f5af11de75413db8.jpg

Cab removal
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod2710f8f4f8e888ce9bc2c0c24371e41e.jpg

rut row raggy
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod3bb95288955e7bdc1134ea8022074224.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodf3ac6f005eec3ba28180dc913987afe9.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod3a1c18a2a84370e75e2a08c48071e360.jpg

had to pull her inside, it got hot sunday
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod61742258e692d2835ad4e95c8fc253a8.jpg
 
tonight I pulled some more garbage out. This mess, had to go.
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod16f3e183ebf237ed62828525d9b77f7f.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodf82d306cbaa46b9bb185539fcea66a95.jpg

so much better
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod4ac7af5476cd67e3f08367fe0b7f9e06.jpg

this has all been deemed, "not required"
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remoddfc416d469b7bc029ef83605944e1890.jpg

yaaaaaa, when making an entire vehicle the ground, unhook this at the source
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod58875dc9c1e8638443c311eb640aa1d8.jpg

the rest will continue next week, got a busy weekend of traveling ahead of me
 
Did some cardio tonight and shaved a few more pounds. There was mud, EVERYWHERE.
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodcc5b0401d2bef11b97152b4d0c12d548.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodf65a8c9c73d3c020984731f59cae69c2.jpg

Little more, still plan to cut a few inches further, leaving from the door jams forward, for now. the rest will go when I link/stretch the front, probably a year and a half from now. I know, I should just build damn chassis already, just don't have the space at the time.
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodcdc8b88f32e163773863fbfed8c3b42d.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodfcb453edce1fb6836c0fe2f6e979a146.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodf90f2503491e5b94f3bfbed45c040905.jpg

Saturday I'll be trimming a little more and starting on a layout for a floor and seat mounts
 
Haven't updated in a bit, here goes

Had a plan for seat mounts, so I made these
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod2486c6c2adb4352e27131fa941bbb63c.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodaf53d0a1e7513fb2bbb6b2156719ad77.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod1d7f7bb3b8f3219661009933ad1bfb2b.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remoda4d1c5cc38521e53a847f903fad51be7.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod17404ff21ca7ae4d846af0850badbbf0.jpg

Really miss having a big bandsaw, did this all with a portaband, ughh
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod665f0def891ef82e7ccae831cea1e515.jpg

Started laying out the cage
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod563ea04246256290bcef33af89062e33.jpg

This seemed too high for my taste, plus didn't work out with the cowl how I wanted
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remoddb2f3e5dc0fd7216e54b4767002ca14f.jpg

So I cut 3/4" off the tubes and this was money
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodc2f5665f35e5e5d230ba5c4473f009c1.jpg

And then my seat mount idea
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodf7a3dc3a80e1064e4053c2c81acc0212.jpg
 
It was a nice simple idea, but wouldn't allow the seats to be supported how I wanted. And I wanted to use my old seat brackets.
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod905e4e8480631fd4ee026c71f83b1038.jpg

Tubes are rough cut to length
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod37946d14fb9babc62467d91a02173c53.jpg

But I did sucker the wife into coming over to the shop to make some wedding decor, figured I'd work on the truggy, I was wrong.
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodaf90091cfe1999a8524b4cb71232571c.jpg

This is what I came up with for the dash frame, used the pieces I had already bent
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod2b890bd59251c4bbabe75db29273cc49.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod1607a47d7fa03d6eca38f99b21ca9776.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod9a6a84caabe9c4cd2e4049d7e977c9b4.jpg

About 9/16" to the crossmember
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod056376b1ceb6d596ee85c0b0a892d6b6.jpg

Friday night I got the wife to come hang out, she brought her vodka and beer for me! Pulled dash frame out and fully welded it
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod354ffe5ee14f95c17e7c3b9ed93eb160.jpg

Then glued it to the sliders
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod7861dfe357ddf4c0135b6b2809f99ab2.jpg

And glued in the rear tube
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod73f09b2f0d4a3db17006f7ead7a5f75f.jpg
 
Then the next part of my master plan
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodd8ccdda38c99b6260837cce25c73e461.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod44ae8d7dfc45931e488fddfc836b78b3.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod6c14e6fd46ba5a2cdc9cb8151d6de84f.jpg

Got it all in and finish welded Saturday. Without the seat frames
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod8c349ad21a409eb088ff776298afbaa9.jpg

With frames
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod2259099312edfe7fc16064aeb849afc6.jpg

Then I got the a-pillars on
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod061375bbeed6abe6fb8b4e36a0a5a40d.jpg

Angry brow bar, which got slid up a bit before welded in
ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod4d2feb172e704894baa5c3d48f85e72b.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remodf0f376f9a5da3333e14dacbaa25c6d1d.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod8057379726b35d0f0fa02f70b5967986.jpg

ai895.photobucket.com_albums_ac151_kouperstein2_Truggy_20Remod116b4e4c0c05821a2d4daacf1f9fc262.jpg
 
I really wanted to hammer it out and go wheeling this weekend at The Flats, but I started this renovation with the sole intent of not having a deadline. The rest of the truck I've done with my OCD level of doing everything right, and tonight I got frustrated with one thing, knowing it was going to slow everything down, I backed off. There's no point for me to rush to go wheel locally. My original intent was to take my time, not burn myself out and so everything the way I want it, not rush to get it out on the trail, which I did initially, which is why it's all cut apart now, to fix my rush finish-up job. Whole pace will slow up once again, the rest of my summer is busy, getting married in 2 months, don't need to stress myself with this.

But she sits in the parking lot, right outside my door, so it won't be completely back-burner'd and forgot about.
 
Back
Top