Another garage/house clean out

[Andy J.]

You know the drill. I have too much stuff and not enough time or space. I’ll update this first post as things get added or sold. Everything is located in Winston. I’m willing to meet within reasonable distance or ship on your dime. Feel free to make an offer if you think my pricing is off or to make a combo deal.

1. Proto 3/8” dial torque wrench. 0-250 in lbs - sold

2. Craftsman 50pc tap and die set. USA made. Sorry for the sideways label picture. $120

3. North American M16 x 1.5 tap. Included with the Craftsman set above or will sell separately for $5.

4. Chinese slide hammer and puller set. $20 $15

5. Snap on timing light $40 $30

6. Ideal tire groover. Used this to groove a set of TSLs. Been taking up space in my box ever since. $60 $50

7. Flaring tool for brake lines. - sold




8. Craftsman Made in USA impact socket set, missing the 1-1/16 size socket. $100 $80

8a. Badass popcorn machine. Commercial theater popcorn popper. I've popped around a dozen batches in this machine since new, and it makes the BEST popcorn. I got it thinking I would use it at a bunch of events for my Boy Scout troop, but that hasn't really happened. $1400 new, but I guess there probably isn't a huge market for this unless someone wants it for another organization or you want to invite your friends to your home movie theater and give them the full experience. Let's say $900 obo. I will also include about 30 lbs of popcorn.

 

[Andy J.]

9. Weller soldering gun/iron - sold

10. Grease gun and a new longer hose. $20 pending

11. Cornwall Tools 3/8” air drill $50 $40

12. Craftsman air hammer, never used. $40 $30

13. Desert Armor automatic tire deflators - sold

14. Knuckle pull scale - this is for you Yota guys to set the shims right when you replace the knuckle bearings on the front axle. You could also weigh your fish with it. $15 $10

15. Hitachi 18ga brad nailer 5/8”-2”, no box $30 $20

16. Hitachi 18ga brad nailer 5/8”-2”, with box and a couple partial packages of brads $40

17. Bearing puller set $40

18. Brand new car care set. Do people even wash their own cars anymore? $5

End of part 2.

 

[Andy J.]

19. Jumper cables - sold

20. Amazon JK tailgate table. NIB $40

21. Midway 75-822 handheld CB radio - sold
22. 2 ton come-along, new condition - sold
23. Wixey digital angle gauge - sold

24. Vintage Coleman 502 model single burner stove from the 60’s. Brand new. There are very few of these left that are brand new. Box is a little rough, but still holding up after 60 years in storage. $200

25. Classic Coleman 2 burner propane stove. Brand new. $40 pending

26. Guardian 24” Ethos 7-speed bike with SureStop braking system. Guardian says it fits kids 49”-57” in height. I bet my daughter rode it for less than an hour or two in total. It has a few small scuffs from being on a bike rack with other bikes. Still has nipples on the tires. $200

 

[Andy J.]

Last post reservation. Yeah, I have a lot of stuff and I like pictures.

27. Craftsman padded creeper, lots of pin holes from welding upside down on it. $20

28. Never used Craftsman 25’ air hose reel $40

29. Everyone needs a push broom! Libman brand. $10

30. 120/240V Vulcan MiG welder with cart, nearly full take of gas, accessories, and auto-darkening welding helmet. Practically brand new, used about half a dozen times before I sold my wheeling rig. $1300

31. Lincoln welding parts and accessories. Full spool of wire, contact tips, wire gun tip cover, wire feed wheel. These were purchased for a Lincoln ProMig 135. Probably fits other small Lincoln welders. $40

32. Raised bed frame for full-sized mattress. All hardware and parts included. ~1’ long separation in one of the corner posts at the top, but doesn’t affect it structurally because the 2-pc corner posts gets bolted through (if that makes sense). When assembled, looks like the corner post is cracked. Could easily be repaired. Otherwise is good condition. $150

 

[JSJJ388]

I'll take the grease gun, and maybe the camp stove. Let's see what other stuff you're selling that I can use to aggravate my wife...

 

[BRUISER]

PM sent

 

[CarolinaHD]

how much to ship the cb radio to 28138?

 

[Andy J.]

how much to ship the cb radio to 28138?

It’s pending sale, but if that doesn’t work out you’re 1st in line.

 

[Andy J.]

Dang it, I should have reserved one more post

 

[DSM Turbos]

I need that welder (for no actual reason), you should bring it for free since you left Friday night and didn't stay Saturday at the GTG

 

[Andy J.]

I need that welder (for no actual reason), you should bring it for free since you left Friday night and didn't stay Saturday at the GTG

Since I missed you at the GTG, I’ll bring it to you AND buy you some lunch.

 

[Andy J.]

I'll take the grease gun, and maybe the camp stove. Let's see what other stuff you're selling that I can use to aggravate my wife...

Joel, you still interested in the grease gun and stove? I just added a sweet popcorn machine that she would LOVE!

 

[JSJJ388]

Joel, you still interested in the grease gun and stove? I just added a sweet popcorn machine that she would LOVE!

Yes to the grease gun lol.