- Joined
- Mar 17, 2005
- Location
- N. N. Raleigh, NC
I havn't really posted much on my camper project on this site. I know many have been following along on PBB. But I figured since I finally got some pics showing how it will be setup, I'd post them.
Camper Update
- Thread starter Yay!Gurrr
- Start date
- Joined
- Mar 13, 2005
- Location
- Raleigh, NC
Need to get a mod to move this to the For Sale section....
- Joined
- Mar 17, 2005
- Location
- N. N. Raleigh, NC
mounted with same rubber bushing setup, welded on some new brackets made with 4" angle for now the plan is to leave it on and use it 
(until I sell it) we pushed it up using some 2x4s and a floor jack, would have taken longer with 1 person but still doable. After doing it that way I have a much better idea of what I need to do. Gonna use a single channel attached/clamped to the side of the trailer, 2 straight wheels bolted to the center of the camper will guide/keep it in the track. Using 2 2x4s on each side underneath as a rub/guide to wheel it down. I plan to find a winch eventually...
(until I sell it) we pushed it up using some 2x4s and a floor jack, would have taken longer with 1 person but still doable. After doing it that way I have a much better idea of what I need to do. Gonna use a single channel attached/clamped to the side of the trailer, 2 straight wheels bolted to the center of the camper will guide/keep it in the track. Using 2 2x4s on each side underneath as a rub/guide to wheel it down. I plan to find a winch eventually...gavan
Well-Known Member
- Joined
- Jul 12, 2005
- Location
- Houston, TX
I am sure Gavin is not always available
1. gavAn...
2. Usually available. As long as the dog is walked and the wife is busy with school work.
The thing is very, very stiff and actually pretty easy to move. A (pretty good) push and it slides well on 2x4's, and a quick jack on the sides makes it very easy for one person to move.
It looks good, the Jeep loads well on it, the door even opens (enough) with the Jeep loaded.
The only thing he needs to do it keep it...
- Joined
- Mar 16, 2005
- Location
- Archer Lodge
- Joined
- Mar 17, 2005
- Location
- N. N. Raleigh, NC
Last time I was at Shawn's house his 1 tons were sporting 235s.. Seems the 38s weren't working out....... AT THE MALL
- Joined
- Mar 10, 2005
- Location
- Hooterville (24171)
BWHAHAHAHAHAHA!
Hope you'll actually use this version....
at least once before it goes to fleabay!
- Joined
- Apr 18, 2005
- Location
- Greensboro, NC
Looks ready for Harlan this weekend
Rich
Asshole at large
- Joined
- Mar 17, 2005
- Location
- Central PA
Last time I was at Shawn's house his 1 tons were sporting 235s.. Seems the 38s weren't working out....... AT THE MALL
With that ditch digger unshaved 14b, does he get hung up on the speedbumps if he doesn't cross them perfectly straight now?
Mike, I don't think you'll be able to be a moderator/admin now, since you're gonna actually go wheel.
- Joined
- Mar 21, 2005
- Location
- Raleigh, NC
wheres the AC unit, and pics of the inside?
Its looking great, are you still going to Harlan?
Its looking great, are you still going to Harlan?
- Joined
- Mar 17, 2005
- Location
- N. N. Raleigh, NC
No AC unit yet, im still deciding where to put it.. (Don't think I need it now anyway...)
Dono about Harlan yet, work project rollout this coming weekend, ill know on wed. for sure.. I'm getting ready in case.. If not Ill goto DPG... Inside, not done yet.. You guys going ??
.
Some of the interior....
Dono about Harlan yet, work project rollout this coming weekend, ill know on wed. for sure.. I'm getting ready in case.. If not Ill goto DPG... Inside, not done yet.. You guys going ??
.
Some of the interior....
- Joined
- Mar 20, 2005
- Location
- Morganton NC
Some familiar items inside there LOL
broncomania
Well-Known Member
- Joined
- Aug 8, 2005
- Location
- ASHEBORO,NC.
thats cool. i like it.
Looks like it has an attached garage too. Nice work!
- Joined
- Mar 17, 2005
- Location
- N. N. Raleigh, NC
lol garage... yup.. self inflating.. tools included..