SBC & TH350

doc

doc

Odd Member
Joined
Mar 20, 2005
Location
Southmont
Looking for a smallblock Chevy & possibly a TH-350....

Cores are fine, mocking up a swap...

Will consider running, whole vehicles too...
 
I have a TH 350 that I would sell. it was supposedly rebuilt and ran before I got it. I think it has a TC with it, I'll have to check to be positive. $300. I'm in Mint Hill
 
Thanks guys, a guy is coming next weekend to snag the 394/trans & once it's gone I'll makes some moves...pad & shop is a mess.
 
20260403_155201.jpg

Thanks to @willness33 & @R Q , I am now mocked up...just need that running sbc.
 
strange1 said:
That sounds interesting. Tell me more.
Click to expand...
This unit, shifted into all gears manually, but I couldn’t get the terminator to shift due to not hooking up the brake switch to the lockup converter circuit I think. Wanted a manual from the get go, so I swapped for an sm465. Uses Chevy vss tooth count. Has about 50 miles and the fluid that drained out had no metal in it.

All raybestos friction and steels, transgo plate and phenolic balls about $400 in sonnax upgrades, z pac, lockup circuit upgrade, 5 pinion planets from an Escalade, stock stall new torque converter, 13 vans pump, cyclone transmission valve body pump and 3/4 assembly, wide band reverse, monster sun shell. 300m output shaft 27 spline adapter works with d300, np231, np241j, atlas

Would take $500 if you pick up in hickory, stored inside garage. It has hard lines that go to the front of an ls so you can run short hoses to a cooler

IMG_0800.jpeg


67155893773__7AA8E4D4-FE20-4720-A4AF-751A045E0CAA.jpeg


IMG_1098.jpeg
 
Back
Top