What axles and size tires yall running

Currently HPD44 front, cromo axles,ARB. 14B rear, disc,spool,5/13's w/ 39.5 Iroks. Soon to be HPD60,cromo's,35sp outers, LockRight,and 42 Iroks
 
dana 27 front(broke the d25 had to upgrade) dana 44(2 pc)rear,
both 10 spline, 5.38, lockrights in each...runnin' 34x10.50 ltbs...
283 chevy...heavy right foot...:driver: cromo's r 4 homo's...:flipoff2:
 
I've got a Land Rover, so I've got goofy axles:

Front is a stock rover, rear is salisbury.

Street tires = BFG MT KM 235/85/16
Off Road tires = 34x9.5x15 on steel wheels with weld on beadlocks
 
85 4-runner. Front axle FJ-40, chromoly everything, with minitruck knuckle out
rear axle is centered FJ-40 with minitruck shafts.
Discs and locked on 39" iroks, chevy 350, 465/205
 
36 IROKs,toy 8s, locked front welded rear, birf eliminators up front, dual 2.28 cases, 5.29, 22re, 5 speed, PTO shafts. sheared all 6 bolts and the dowel pins on drivers side lockout. No other failures in 1.5 years
 
Toy 8" with 42"iroks on H1's. 6.5 t-case with 5.29's, detroit, spool, blah...blah. Helps to be on a 2500 pound rig! A few at the farm can attest, spinning wide open in third and came to a dead stop when the tire hit a tree, nothing broke! Something will eventually give though.
 
I go a little backwards...

Dana60/ford 10.5 with 265s on the tow pig

Corp 10/14bff with 37s on the street jeep

D44/D44 with 35s on the wheeling rig
 
waggy 44's with 488's ,spool in the rear and detriot in frount. factory axles and 35x16x15 boggers.never broke yet but i crawl most of the time but thrash on it when needed. thinking about 38's and crossing my fingers and see how it does:huggy:
 
Back
Top