rcalexander105
JV Wheeler
- Joined
- Nov 3, 2017
- Location
- High Point
What springs and pitman arm you running? Relocating the steering box forward?
Sent from my SM-G950U using Tapatalk
What have you done to your rig today?
- Thread starter broncosbybart
- Start date
Sent from my SM-G950U using Tapatalk
Chris_Keziah
Joe Dirt @ Rev Limit Fab
- Joined
- Dec 1, 2010
- Location
- Winston-Salem
Planned completion date of 2020? If you ever need a hand working on that thing let me know, pretty sure you're not far down the road from me.
YotaOnRocks
Well-Known Member
- Joined
- Jul 17, 2007
- Location
- Madison
3f springs from sky with a flat Pitman. Yeah I'll be shoving the box forward.
YotaOnRocks
Well-Known Member
- Joined
- Jul 17, 2007
- Location
- Madison
Hoping for a coulple weeks max. Drove it to work a couple days this week. But the windshield leaks something terrible. Plan is to get front suspension done and then tear it down for some body work and paint.
YotaOnRocks
Well-Known Member
- Joined
- Jul 17, 2007
- Location
- Madison
I've spent some money on this old turd recently but I'll be done soon and won't have a monthly payment to deal with.
YotaOnRocks
Well-Known Member
- Joined
- Jul 17, 2007
- Location
- Madison
Some stuff fell off . And a pic of the new springs next to the old ones. Not sure what the old ones are.
- Joined
- Mar 20, 2005
- Location
- Hendersonville, NC
My old exhaust had a few leaks in the muffler finally let go at Hurricane Creek last weekend. Amazon had a pretty good deal on a Dynomax cat back.
Also replaced a leaking brake line from the rear axle up to the master cylinder.
Also replaced a leaking brake line from the rear axle up to the master cylinder.
junkxj
Well poop!!!!!
- Joined
- Nov 19, 2014
- Location
- Mexico!!!!!!
I had my eye on that exhaust for a while, I meant to order it early last week....
RubiconBear
Well-Known Member
- Joined
- May 31, 2012
I got the TJ version to replace mine that was about to go. It's a good price for what you get.
mommucked
Endeavoring to persevere
- Joined
- Sep 26, 2011
- Location
- Rural Apex n.c.
New wheel,tire,bearings and hardware,hone and grease the rusty axle and alignment on the old wood hauler................. in about 10 mins.
$14.99 on amazon and $1.50 for the hardware
$14.99 on amazon and $1.50 for the hardware
Last edited:
obullfish
Carolina Trail Blazers
- Joined
- Nov 21, 2011
- Location
- Candler N.C.
Should have went with the solid tire
Jeff B
Thanos was right
- Joined
- Dec 23, 2006
- Location
- Lincolnton N.C.
- Joined
- Mar 20, 2005
- Location
- Hendersonville, NC
Should have installed a Rough Country dual stabilizer kit. The JK crowd says it's the best.
Jeff B
Thanos was right
- Joined
- Dec 23, 2006
- Location
- Lincolnton N.C.
I can't do the JK thing man. I like my jeeps like I like my women, 20 years old with lots of problems..
- Joined
- Mar 20, 2005
- Location
- Hendersonville, NC
Very nice kit. Install was super easy and 100% bolt in. The exhaust is nearly stock level quiet (which I like in a DD)
Overall, I give it 4.8 BTLs out of 5.
- Joined
- Mar 20, 2005
- Location
- Hendersonville, NC
You need a Russian vehicle. They age very well
Pretty sure that XJ is 'Merican and may begin to have QC issues around 30
I shattered the coolant overflow bottle on my Wrangler a while back (plastic became brittle), finally got around to replacing it this weekend.
Also finally got around to driving to Asheville to pick up the new 35" tires I negotiated in the deal when I bought my truck. But I've still got another 4-6 months left on the current tires before I swap these on. And my Wrangler really wants them... sooo.....
Also finally got around to driving to Asheville to pick up the new 35" tires I negotiated in the deal when I bought my truck. But I've still got another 4-6 months left on the current tires before I swap these on. And my Wrangler really wants them... sooo.....
Jeff B
Thanos was right
- Joined
- Dec 23, 2006
- Location
- Lincolnton N.C.
YotaOnRocks
Well-Known Member
- Joined
- Jul 17, 2007
- Location
- Madison
So how does my steering box location look?
a_kelley
mechanical fixer
- Joined
- Jan 26, 2010
- Location
- Rutherfordton
It'll ride. Maybe a hair towards the axle to put it more in line but that may be the picture.
Chris_Keziah
Joe Dirt @ Rev Limit Fab
- Joined
- Dec 1, 2010
- Location
- Winston-Salem
I'd rock it every day of the week.
YotaOnRocks
Well-Known Member
- Joined
- Jul 17, 2007
- Location
- Madison
I think its just the picture angle. I'll double check before burning anything in.
obullfish
Carolina Trail Blazers
- Joined
- Nov 21, 2011
- Location
- Candler N.C.
Finally had time to give it a wash today after work. Think it’s been almost 6 months and 4 wheelin trips since it’s last.
rodney eppes
Well-Known Member
- Joined
- Feb 3, 2010
- Location
- Mt.Holly NC 28120
May be the angle of the picture, but will the tie rod, clear the spring plates?