Random pic thread.

Made some benches at the pistol range/ camp area
IMG_20210120_134852_232.jpg
 
View attachment 336258
We hired out a Small cherry picker. Gonna be a few long days this week.
You’re going to be impressed by what that thing can do. It’s likely able to be remote controlled not only the crane functions but traveling as well (low speed) where you see the red and white vertical stripe is the separation where the rear can extend back as a counter balance probably about 5ish feet, there can also be added weight plates on top as well. I’ve been trying to get one of my customers into a similar rig only has a forklift mast and forks would replace two 50yo machines that are difficult to find parts for.
 
That's a neat little rig. I've never seen an indoor crane like that. Last time we had to move a big piece of equipment, we brought an outside crane inside. That little rig would have worked a lot better!
We are changing some bearings.
 
You’re going to be impressed by what that thing can do. It’s likely able to be remote controlled not only the crane functions but traveling as well (low speed) where you see the red and white vertical stripe is the separation where the rear can extend back as a counter balance probably about 5ish feet, there can also be added weight plates on top as well. I’ve been trying to get one of my customers into a similar rig only has a forklift mast and forks would replace two 50yo machines that are difficult to find parts for.
Everything but the remote applies. They supplied one rigger and a operator. So far only one guy has done much. Not the rigger....
 
My wife has mentioned the pallet beds she's seen on pinterest. Is this what she means?
1611244803100.png
 
$100 delivery/ $100 pickup from herc last time I got a boom lift. Edwards charges a lot more than that just to drive from spring hope :lol:
pretty sure Edwards won't let you be the guy operating the rig once on site either...
 
0121212003_HDR.jpg
0121212003b_HDR.jpg0121212003a_HDR.jpg
We stopped here. 6 thirty am to 8 thirty pm.
A bearing inside this fly wheel was the whole reason.....it's also froze to this shaft.
 
Back
Top