95 Toyota Pickup 1 ton !!! NEWEST SWAP

[paradisePWoffrd]

Not sure why you chose Galloways, but always remember: Good, Cheap, Fast, pick 2 if youre lucky.

 

[Hunter44]

Only see one lol GOOD. They do good work and I trust them with my vehicle.

 

[Bigben75ford]

Not sure why you chose Galloways, but always remember: Good, Cheap, Fast, pick 2 if youre lucky.

lol all the good ol boys around here still go to galloways for some reason.......even though its less than use to be. Im just glad to see if your truck is still gonna be retarded tall you will atleast have somethign bigger than yota axles lol.......

 

[Hunter44]

It's coming down around 6-8". May take the 3" body lift off as well

 

[Buddy Holly]

I have yet to see a pic of this truck before it was torn down for the build. You got any pics Hunter?

 

[Hunter44]

There's one in the thread "Let's see them Toyotas" in the vehicle gallery section. It was on 44s then, now on 49s.

 

[phillyray]

 

[phillyray]

Found it. Looks like a really clean 3rd gen

 

[Hunter44]

That's it. And that's the nicest comment I've heard about my truck from anyone on here lol.

 

[cgm147]

Chris just sent me a snapchat with the axles and tire on it.. if you haven't seen it, it's bad ass

 

[Hunter44]

Send it to me. 336-953-4931

 

[Hunter44]

Almost done, just a few kinks left to be fixed and double check everything! Couldn't be more impressed!

 

[StretchASU]

Not my style, but a good looking truck either way.

Idk if its just the angle of that picture, but that rear shackle angle looks a little suspect.

 

[paradisePWoffrd]

So I guess they got it done this week?

 

[Hunter44]

Said Monday itd be ready. Have to double check everything and install my 1 ton master cylinder

 

[Hunter44]

Dropped it down about a foot or so. More than I thought but I'm very satisfied

 

[frankenyoter]

Your driveshaft looks small in this pic.

 

[Hunter44]

Going to ride up to Olivers next week to have a shaft made. What your referring to is the vent hose from the differential.

 

[krehel24]

I told you they would have it done fast!!!!!

 

[Hunter44]

Today maybe lol!

 

[Hunter44]

More pics

 

[CThurmond]

I just don't get it.

 

[XJsavage]

I'm not one to leave a negative comment on a persons build thread, so I'll leave a constructively critical one: Your steering is going to suck. The angle on the heim joints is nothing short of scary and if that suspension sees any down travel at all, it will break bolts, kingpin studs, spacers, and/or rip the steering box straight off the frame. That much lift is never good for anything and what could be a functional truck is now not.

No hard feelings but someone had to say it.

 

[Hunter44]

Would a high clearance steering arm help any? I've had it back for about a month now, nothing has happened yet and I pray never does. As for down travel, it sees quite a bit.

 

[XJsavage]

The only logical solution would be full hydro. There's a huge debate over whether its street friendly or not. Legality is another thing. I've never personally ran it but if I had to I would give it a whirl.