Bad seller: Studnuts

Status
Not open for further replies.
At least I got a new sig out of all this!!!
 
Am I missing something here? What it looks like to me is all of this bullshit and bad image over the cost of 1 AMC 360 head and possibly a new head gasket. The engine is on a stand, replacement would take all of an hour.
 
Am I missing something here? What it looks like to me is all of this bullshit and bad image over the cost of 1 AMC 360 head and possibly a new head gasket. The engine is on a stand, replacement would take all of an hour.

Bad image for who? Remember, 2 years is gone by. And those two little words, "as-is".
 
So after reading this thread I have 2 comments

No I have not seen the motor in person but based on the photos:

1. I talk to one of the guys I work with about the issue here (he has been rebuilding motors for 35 some odd years) before I told him the story I showed him the photos of the motor oil and he said "That Motor has been ran with water in the oil probly from a cracked head around a coolant passage" after he sayed that I then ask him about condensation getting into the oil by letting a motor sit. he told me that the only way water would get in the oil is if someone pour it in there or a coolant passaged was cracked. water does not just condensate in a put together engine block (water can't get thru steel) and if it did, and was not ran the the oil would sit on top of the water not mix together.

so that being said

2. Don't buy an as-is motor
 
P9020033.JPG

I really don't have anything to add here on the wether he handled it wrong or who's at fault.

I've been watching the thread..and just choose to not post in.

Just curious here though. Does any other "motor guy" see something odd in this pic.

There is clear water in the bottom of the bottle. That is either condensation or where the water started to seperate again.

The milkshake on the top doesn't occur from sitting on a stand or rolling/transporting/shaking it.

Wether he knew it or not, that motor was running with the oil/water/antifreeze circulating through it.

Again just looking at the pic
 
Bad image for who? Remember, 2 years is gone by. And those two little words, "as-is".

They both came out looking a little childish, but I might not have been clear enough in that post--I'm definately with studnuts here. This would have been one of those things that I would have dealt with myself--especially after having the engine for two years.
 
I would like to offer up a formal apology for not reigning in my emotions. I will admit I could have handled this better but like I said things have been rough for me. When I discovered the water about a year and a half ago I didn't raise too big of a stink at the time because I felt that all the parts were good and I could rebuild it. But when I discovered that the head was cracked it sent me over the edge. Again, I apologize for not keeping my temper in check.

Please lock the thread now.
Shane
 
I would like to offer up a formal apology for not reigning in my emotions. I will admit I could have handled this better but like I said things have been rough for me. When I discovered the water about a year and a half ago I didn't raise too big of a stink at the time because I felt that all the parts were good and I could rebuild it. But when I discovered that the head was cracked it sent me over the edge. Again, I apologize for not keeping my temper in check.
Please lock the thread now.
Shane
Now thats how it's done we all have a temper

here is a :beer: for you
 
no I'm still kicking, but webwheeling and it's "ass holes" from there are dead to me though! there are a few lost souls there I miss, but you aren't one of them! this is a public forum, so I guess it is my buisness and everyone else's that hangs here. your the one that came over here and showed us your arse and how immature your weak little mind is.
next time you should check your ego at the door.
waiting two years to bitch about something is sad and lazy...
don't whine about personal stuff keeping you from checking the engine out. there have been plenty of times. Example: you had time to go to tellico destroy your emplyer's company truck(sombody should call them and let them know you did it on purpose), get drunk , piss on your cigs, and then smoke them.
go back to webtrolling and grow up or go cuss out your wife you're pretty good at that
I still say this is a sad WW troll
w/o any lol
one good troll deserves another!:shaking:
BD

booby, i really dont give a fawk about what you have against shane. dont bring WW's members into this. dont call me an asshole, myself joel and shane and several other members of that board have gone well out of our way to help you with your TJ on several occasions. assholes eh? same guys who were there for you and your family when you had a heart attack... the list could go on.. after reading your post, i have lost a tremendus amount of resepct for you. it sounds like your just tryin add to this pissing match... cause i know you have nothing intelligent to say about the inside of shanes motor :rolleyes:
 
first off, I want to acknowledge that both Shane (Scarface) and Jon (Studnuts) both feel bad about the way this thread turned out and neither party intended it to let it get this far out of whack. both guys were very cordial behind the scenes in PM back and forth to me. i also want to commend these fellas for manning up and apoligizing publicly here.

but this reminds me of an ancient chinese proverb, loosely translated as " When the horse dies, GET OFF!"

THREAD LOCKED
 
Status
Not open for further replies.
Back
Top