My motor is done

[NASH-TY-AMC]

here is a picture of my amc 360 that is done finally

 

[Jeff B]

no pic. Have you seen the testing ground?

 

[NASH-TY-AMC]

thanks i will look their,i am not real good on a computer

 

[BRUISER]

engine loooks good.. did you rebuild it yourself?

 

[NASH-TY-AMC]

no, i didnt the short block was built by a buddy and i did the rest

 

[amcjeepman]

Wrong shade of blue, otherwise nice.

 

[NASH-TY-AMC]

Thanxs,I'm a Kentucky Wildcat fan

 

[upnover]

Might wanna put some belts on it. Has anyone used that type filter on the oil fill before? Mine is still stockish with the hose running to my breather.

 

[Caver Dave]

You're not keeping the points dizzy are you? (unless it's being used as a 3500rpm "rev limiter"? )

Has anyone used that type filter on the oil fill before? Mine is still stockish with the hose running to my breather.

Can't see it hurting. Mines the OEM steel canister (w/ some filter media stuffed into it... when the original "media" turned to dust! ). His filter does have a "modern" look about it!

 

[upnover]

You're not keeping the points dizzy are you? (unless it's being used as a 3500rpm "rev limiter"? )
Can't see it hurting. Mines the OEM steel canister (w/ some filter media stuffed into it... when the original "media" turned to dust! ). His filter does have a "modern" look about it!

He might have the protronics in it like mine!

Mine has the media in it too. I kinda thought the vaccum from the carb would help pull gases from the crankcase like the PCV does.

 

[guffey24]

I used that same breather on my 401 build, It worked pretty good

get rid of the petronics and swap a motorcraft dizzy, and do a Ford TFI upgrade on the thing, you will thank yourself later, an Chip might disagree

 

[NASH-TY-AMC]

thanks for the tips but I just ordered a H.E.I dist. from bulltear.com for the AMC buffs

 

[NASH-TY-AMC]

also the dizzy pictured is an msd amc pro-billet

 

[tusk762]

man that thing looks good,but the distributor is at the wrong end

 

[Mac5005]

looks good man, ive ran a breather like that before, worked great until it got dirty, then it just sucks

 

[mbalbritton]

man that thing looks good,but the distributor is at the wrong end

hhhhmmmm, looks like it's in the correct position to me