What have you done to your rig today?

[Loganwayne]

Trans cooler outta my 7.3 put in my xj cost nothing and fit perfect

 

[strange1]

Let the air out of the passenger side front so I could get a chunk of wood out from between the tire and rim. Exciting times.

 

[CThurmond]

Swaped my gas getter to Efi from carb
this month

88 festiva to a 91 festiva 1.3 also swapes in a 5 speed. If it runs well on the stock efi it will get a 1.8 turbo.

Fun lil turd

 

[boatedwagon]

Drove it

 

[McCracken]

Fixed the steering and drove it around after doing some tuning on the ORIs. I still need limit straps if I plan on doing any sweet jumps.

 

[anvilrubi]

Put this stinger on today.

 

[jeepinmatt]

I bought some bigger tires a couple weeks ago. Does that count? Here's a well worn 36x13.5 TSL Irok beside a 90%+ tread 35x12.5 BFG KM2. Apparently a TSL inch is bigger than a BFG inch.

 

[Jody Treadway]

I swept under it and neatly stacked about $7k worth of knuckles, PSC stuff, 40" Treps and link parts.
Maybe I'll have time to work on my own rig soon...

 

[rockcity]

I cut all the shitty brackets off of the samurai axles someone years ago welded on with what appears to be a 110V welder set at about 40 amps and with their eyes closed.

You should have to pass a test before buying a welder

 

[frankenyoter]

Since we are going to get a bunch of rain today, I put a tarp on mine last night.

 

[Jody Treadway]

You should have to pass a test before buying a welder

I never pinned you as an Obama/ Big government kind of guy.

 

[benmack1]

I never pinned you as an Obama/ Big government kind of guy.

Haha. Background checks, cooling off period and permit from your sheriff to buy a welder. stricter welder control laws for the win. Metal lives matter

 

[anvilrubi]

Took the stock flares off tired of them, was really suprised just hiw much space there is in the wheel well.

 

[GONOVRIT]

Rebuilt the master cylinder and got the brakes bled. Test driven and loaded up to go mud whompin tomorrow!

 

[drkelly]

I spent a little time in the garage on Christmas Eve getting the motor in my cab truck ready to be pulled.
I Just need to unbolt the motor mounts and it will be ready to lift out.

 

[GONOVRIT]

I spent a little time in the garage on Christmas Eve getting the motor in my cab truck ready to be pulled.
I Just need to unbolt the motor mounts and it will be ready to lift out.

Holy shit, I thought that thing had grown into the ground by now

What's next?

 

[drkelly]

Holy shit, I thought that thing had grown into the ground by now

What's next?

Haha! That truck has not seen a trail in probably 5 years. It is going to be GONE by next Wednesday.

Thinking about a street legal YJ or TJ on 40" Swampers with the Ton axles and Atlas from the Ranger cab truck.

 

[obullfish]

Actually did no work on my rig but got enough $$$ for Christmas to schedule with Buckeye Performance to upgrade the rear cage in the TJ.

 

[Wes]

I don't have a rig. If I did I would have done stuff to it. Somebody buy my boat so I can post things in this section.

 

[Jody Treadway]

My personal 14 Bolt is getting the Barnes4wd treatment today.
Truss, pinion guard and 13 bolt kit.

 

[Bogleparsons]

new tire carrier. Disregard the German in-laws lol

 

[Rogue]

Replaced the front crankshaft seal. It was seeping and with the great weather today I figured I'd get it done. Easy peasy

 

[BUCKEYE PERFORMANCE INC.]

Finally made permanent mounts for my rear shock reservoirs while trying out the new ac system in the shop.

 

[Loganwayne]

Serviced truck trailer and jeep for the new years ride

 

[CrawlnYota33]

Started mine today for the first time in 2 years. Fired right up after a shot of carb cleaner.