cherokee fans: check it out

Status
Not open for further replies.
once again op we know you dont actually wheel, enough said there. Its your fab skills that worry me and need addressed..... asap!!! Admit fault on all the points you have made and ask for help it will be there. That is why these forumns are here. or just keep it up and natural selection will do the rest.
 
in for what, trouble....I know about the locals....so what ...their crazy anyway if they come out to mess with anyone, people know to bring protection
So its okay that you ride on their land and they are crazy for coming out and saying something?
 
once again op we know you dont actually wheel, enough said there. Its your fab skills that worry me and need addressed..... asap!!! Admit fault on all the points you have made and ask for help it will be there. That is why these forumns are here. or just keep it up and natural selection will do the rest.
Fab skills???? what fab skills?? I didn't know that putting doubler and 38s on xj was fab work. Damn I've got a lot of learning to do with your terms.
 
So its okay that you ride on their land and they are crazy for coming out and saying something?
those people are crazy from I've heard. I've never personally encountered any but I've heard of guns being pulled and crap like that and that's when I quit going out there unless there are lots of people going like on 4/13 supposed to be a whole group
 
couldn't have said it better myself. these guys are loosers with no life and get off on picking at people and running their mouth is all they can do since they can't wheel until their trucks are fixed....he he he, I'm just here having fun with them now just because it's funny to see grown men act like middle school kids picking at each other but yet guys like me are making progress in their builds and having fun, when the only fun they have is typing a trail dream.....oopss I'm an ass
 
Hey I looked up in the Dictionary what Fab means and it actually said "a XJ Fool with 38s, 231/231 Doubler, welded 8.25, D30 and a nice Dorkel with a unibody Sport Utility Vehicle AKA Jeep Cherokee" that's amazing that they put that in the Websters Dictionary
 
and I called OBAMA and asked him about his thoughts on fab and he agreed to make it a law and arrest anyone with that build
 
I'm gonna start four-wheeling with a horse and carriage instead of my xj. Maybe that will get me some props.
 
Your an idiot. Save yourself some time, money, and other peoples safty and have a real mechanic work on your shit.
 
Like i said i just want to see you do one thing I did that day, you said you would impress us and put on a show, but crawling around on stuff my little jeep can do won't impress any one.
Difference between you and me is you're on 33s so you need a 10K winch and me on 38s with better crawl ratio don't. you have to beat on yours with tires that small to get through stuff, DUHH, but on tires this big I don't because of my clearance and hopefully doubler ratio so USE YOUR BRAIN DUFUS, smaller tire = more spinning and harder to overcome obstacles: bigger tire=easier crawl over obstacles....common sense dude. Yeah I can go out on ANY STOCK XJ with 33s and BEAT on it but big deal, that's not tough at all, they can handle it. At least I don't brag about beating on Jeeps with 33s, I'm bragging about running 38s and making it work.
 
Your an idiot. Save yourself some time, money, and other peoples safty and have a real mechanic work on your shit.
Ok dude, I didn't know it takes a master tech to put 38s and doubler on xj. and if you want to talk smack since your in Boone, than go tell HCORE4x4 he's an idiot mechanic cause he's the one who did it dumbass, you're gonna sit here and tell me Aaron Bishop is an idiot. He's the one who encouraged me to do this build so PISS OFF to you looser and he builds rock crawlers for LONG time now....whose the idiot now....I bet you feel stupid now that you know an official builder done this and he actually supports it cause he's a real sport and real stand up guy and bring all my business to him now.
 
I think your Nate the Fab guy in Boone right. I had respect for you too but u pissed that in the wind. wow Aaron is like the only true cool guy that I've ever met who is supportive of anyone with whatever the want to do. I'm glad I didn't call you to do my doubler, you would have shot me apparently.
 
Difference between you and me is you're on 33s so you need a 10K winch and me on 38s with better crawl ratio don't. you have to beat on yours with tires that small to get through stuff, DUHH, but on tires this big I don't because of my clearance and hopefully doubler ratio so USE YOUR BRAIN DUFUS, smaller tire = more spinning and harder to overcome obstacles: bigger tire=easier crawl over obstacles....common sense dude. Yeah I can go out on ANY STOCK XJ with 33s and BEAT on it but big deal, that's not tough at all, they can handle it. At least I don't brag about beating on Jeeps with 33s, I'm bragging about running 38s and making it work.
You're a fucking idiot, you can't even comprehend what the discussion is about. Keep building your shit box and wheel illegally.
 
Actually Aaron is a good friend of mine and has been for a long time. Honestly don't know what you've done so far to this jeep. But as far as the yellow one goes I know Aaron would not do the things you did to that yellow jeep.... Correct?
 
You're a fucking idiot, you can't even comprehend what the discussion is about. Keep building your shit box and wheel illegally.
Hey my shit box is moving right along buddy. come on lets go to richlands and climb a few and see who gets the farthest....without your 10K winch...or who breaks something having to beat on it to get half way up
 
.... smaller tire = more spinning and harder to overcome obstacles: bigger tire=easier crawl over obstacles.....

traction, not wheelspin, breaks axle shafts. Also, I'm surprised no one has mentioned how easily those stock housings will bend with the added weight of a 38" tire on the end. I know how heavy they are, I had a set. And I've seen axle shafts much bigger than yours break without any tire spin at all, with 33" and even 31" tires. You have received some very sound advice regarding axle strength earlier in this thread, maybe it wasnt delivered very well, but it was there.
 
Hey my shit box is moving right along buddy. come on lets go to richlands and climb a few and see who gets the farthest....without your 10K winch...or who breaks something having to beat on it to get half way up
My winch isn't working right now, and Mine will not break. I will not ride on property that I do not have permission to ride on. Come to the flatts in April, please.
 
can I bring my WRX to richlands on 4-13?, it has AWD :driver::D but on a serious note, I would like to go and see this.
 
Actually Aaron is a good friend of mine and has been for a long time. Honestly don't know what you've done so far to this jeep. But as far as the yellow one goes I know Aaron would not do the things you did to that yellow jeep.... Correct?
Actually he thought it was rather cool, yes extreme, but cool. When me and Aaron talked, he's happy to see a guy whose not afraid to build XJ's no matter what he's doing. Yeah, he's given me the pointers about possibilities of this and that, but after hours of speaking about my wheeling style, He said "anyone else with XJ I wouldn't recommend a doubler on 38s but you sound like your smart enough to know what to do and what not to do" that's when I gave him the money to do it and been happy with his support since. Yeah, Aaron thinks I'm kinda crazy too but he's not telling me I'm an idiot and endangering people's lives so that's the difference here between a real guy like him and punks on here.
 
dude you shouldn't put up pictures of yourself like that. that's really disturbing to see. You need help man, get his winch to help you out with that..
 
traction, not wheelspin, breaks axle shafts. Also, I'm surprised no one has mentioned how easily those stock housings will bend with the added weight of a 38" tire on the end. I know how heavy they are, I had a set. And I've seen axle shafts much bigger than yours break without any tire spin at all, with 33" and even 31" tires. You have received some very sound advice regarding axle strength earlier in this thread, maybe it wasnt delivered very well, but it was there.
Axle strength for what you guys do maybe is a problem... For what I do it works just fine thank you
 
Status
Not open for further replies.
Back
Top