Random pic thread.

20160908_192308.jpg
 
Got behind this yesterday on I-40 through Asheville. 427 that looked like it was set up for some road course racing..


View attachment 227866

They are probably headed to the rod run. Saw a ton of sweet rides on trailers today.
 
I saw probably the oldest gas furnace in ten years yesterday. Still cuts on and runs like a champ. The lady said it was as old as the house (which I don't doubt), meaning this is an early 60s model if not older. I was just there to do a duct cleaning.
IMG_20160908_084609580.jpg


IMG_20160908_084918281.jpg
 
auploads.tapatalk_cdn.com_20160910_55c442a1cb1740bf397303e96e3dacb2.jpg


37" red on h2 weigh 97 lbs.
37" red weighs 60 lbs.
h2 weighs 37 lbs.

39" red weighs 93 lbs.

42" irok on single steel beadlock weighs 115.

auploads.tapatalk_cdn.com_20160910_5499e59b3baadb42d07ee50bea4a7fdf.jpg


I'll weigh two more tomorrow.

A 42" sx2 on h1 with pressed center and rock ring with rubber run flat. Weighs either 205 or 215 I can't remember.

Also going to weigh a 42" tsl on a trail ready steel beadlock with aluminum ring for comparison.

The 37" red at 10 psi is only 1" shorter than my 42" sx2 at 5 psi.
 
ascontent_atl3_1.xx.fbcdn.net_v_t1.0_9_14212197_12438593623336d2ed8cd75a125a80695adc2baf750899.jpg
 
View attachment 227900

37" red on h2 weigh 97 lbs.
37" red weighs 60 lbs.
h2 weighs 37 lbs.

39" red weighs 93 lbs.

42" irok on single steel beadlock weighs 115.

View attachment 227901

I'll weigh two more tomorrow.

A 42" sx2 on h1 with pressed center and rock ring with rubber run flat. Weighs either 205 or 215 I can't remember.

Also going to weigh a 42" tsl on a trail ready steel beadlock with aluminum ring for comparison.

The 37" red at 10 psi is only 1" shorter than my 42" sx2 at 5 psi.
Is the 37" red/42"sx2 height difference with vehicle weight or free standing?

A 38" TSL SX 10ply on recentered 12 bolts with rubber runflats and rock rings is 167lbs.

Now get that dang tech outta chit chat :p
 
Is the 37" red/42"sx2 height difference with vehicle weight or free standing?

A 38" TSL SX 10ply on recentered 12 bolts with rubber runflats and rock rings is 167lbs.

Now get that dang tech outta chit chat :p

42s were on jeep, 37s were free. I'll swap them tomorrow and check ground clearance difference.

Haha I didn't feel like finding an appropriate thread so I though this one would work.
 
Is it live axle?


Sent from my iPhone using Tapatalk
Yep.

Thinking about something @ProbablyBroke posted a few days ago with a battery powered air mattress inflator as a super charger...(insert sinister laugh).
 
Back
Top