The Senior Project

Yeah got those spacers posted for sale . message me if you want them. thanks guys. only time i get to work on the jeep is after work for about an hour or when my lil boy takes a nap on the weekends. i got to work today til 1pm so wont get to work on it today, hopfully tomarow.
 
Ok think I got my pinon angle dialed in .used Tom woods website to help with a few questions. What's the max angle the pinon can point upwards ? Just to make sure. Mine don't look crazy just asking .
ImageUploadedByTapatalk1358126013.074208.jpg
 
can someone give me some insigt on waggy springs. ive seen they will stretch the wheel base 2 inchs and gives a 2 inch lift. id like the 2 inch stretch but dont want the lift part , does anyone have any insight on this ?
 
did alittle to the jeep this weekend. got the tubes put in the front tires. then got around to getting the back axle up in the air so i could run the brake lines fromthe calipers to the brakeline splitter. got the driver line ran ,went to do the other side , :( not enough line ! oh well taking off wensday just to work on the jeep. should have called this build The Nap Time Project , cause thats usually the only time i get to work on it is when my lil mans napping. lol
 
ok got alot done yesterday on my day off. got all brake lines for the rear complete and all bowed front shackle isssue resolved from the front perchs on the axle being 1/2 inch wider on each side that factory yj perchs. can any post some pics of their shock set up with a yj set up like mine please. trying to figure out placement especialy on the rear.
 
Kelly,
On ther rear, I used the stock upper mounts and relocated the lower mounts up on the axle tube to get them out of the rocks. On the front I cut of the stock mounts and bolted on some F250/350/Excursion shock mounts. Lets you run a lot longer shock for more flex. I also moved the lower mounts up on the axle tube on those as well. It worked really well. I am still running the front leaf/shock set up.
index.php
 
Last edited:
Little update got my hi-steer links ordered from Metalwerx and picked up a new 78 mercury marquis master cylnder for the jeep yesterday .
ImageUploadedByTapatalk 21362672873.338547.jpg
 
Added my Hi-steer links yesterday and mounted my drive front shock and brake line . Now just got to pick up a reamer from a buddy after work for the stock pitman arm .
 

Attachments

  • ImageUploadedByTapatalk 21363021098.852997.jpg
    ImageUploadedByTapatalk 21363021098.852997.jpg
    107.4 KB · Views: 314
Got the mercury master cylinder bolted up. Not just got to go pick up some brake line tomarow .


Sent from my iPhone while developing new Iron Man armor .
 
Back
Top