StretchASU
Well-Known Member
- Joined
- Oct 17, 2006
- Location
- Creedmoor, NC/Claudville, VA
@tobaccoroad4wd here is the thread I was talking about
Tractor time
- Thread starter CLRracer
- Start date
Loving the tractor. The rear top and tilt is fantastic. I put out 10 tons of ABC last week and going from smoothing to cutting with the box blade from the seat is a “how did I get along without this” thing now.
Hydro trans is so smooth and easy to use. Grapple is like God’s hand.
Grandson likes it…
Hydro trans is so smooth and easy to use. Grapple is like God’s hand.
Grandson likes it…
Man o man, tractor time is a real thing. I cleared the area between the woods and the left side of the shop where the left shelter is going. I can take the grapple, angle it slightly down and clean out laurel and brush including the roots.
I needed to take down three 8-10” trees in that area. I pushed on the 3 trees with it, loader raised high and notched the trees which were leaning the opposite of where I needed them to go. Pushed them right over
Cleaning up is a snap, just push up the stuff, grab it and carry to my brush depository.
Smoothed the area with the box blade and ready to build the left side shelter.
Taking the oak to the area I process firewood.
There was about 200’ like this, easy to make rounds.
I have 8.5 hours on it, down to 1/4 tank so I think it’s decent on fuel use.
I needed to take down three 8-10” trees in that area. I pushed on the 3 trees with it, loader raised high and notched the trees which were leaning the opposite of where I needed them to go. Pushed them right over
Cleaning up is a snap, just push up the stuff, grab it and carry to my brush depository.
Smoothed the area with the box blade and ready to build the left side shelter.
Taking the oak to the area I process firewood.
There was about 200’ like this, easy to make rounds.
I have 8.5 hours on it, down to 1/4 tank so I think it’s decent on fuel use.