Job Hook Ups

Breethroz said:
We actually do not sell any vehicles to individual buyers, besides our own employees. We supply them to dealers and various wholesalers. So in theory Drive-Time could purchase them through us, but at the moment we are not talking on any additional clients.
Click to expand...
Been several years, but I was helping re=work a parking lot, in Charlotte. That's when I found out Drive-Time had a few buildings on both sides of the street. They brought in truck loads of cars, & ran them through, whatever they needed. They were like New, when they were shipped to their sales lots! They were just starting up in the Charlotte area, then. I wasn't aware anyone did that!
 
Throwing this out there. Probably looking for a new job. My company moved to a new office that is further from home, which was fine with me going in to the office one day a week. They are requiring us to be in the office three days a week starting first of the year. I am not wanting to spend 2+ hours a day on the road every day. Especially since I sold my little fuel efficient beater when they told us we can work from home 4 days a week. I'd like to find something closer to come, or ideally working from home. I made decisions on where my kids go to school and some other life decisions based off of that so it makes it very difficult on my family when my wife has to do dropoff and pickup for my younger son every day on top of trying to work her job.

I have over 20 years experience in mechanical design. Most of it in the HVAC and mechanical systems field , about 19 years, using ACAD and Revit but I have machine design experience using SolidWorks (which I honestly prefer). I also have experience growing a business and managing employees. I grew my parts business from borrowing $300 in my 2 car garage to a business with a big shop and 4 employees. I also grew my decal business from a Cricut Joy my parents bought me for Christmas a few years back into a shop that sold $50k in stickers on eBay and Etsy last year and has several large scale cutters and a commercial printer.

So I'm really open to anything as long as the money is decent and it works for my family. I can't afford to take much of a pay cut so I know my options are limited, but I'm just throwing it out there. I honestly could go for a career change.
 
Blaze said:
Throwing this out there. Probably looking for a new job. My company moved to a new office that is further from home, which was fine with me going in to the office one day a week. They are requiring us to be in the office three days a week starting first of the year. I am not wanting to spend 2+ hours a day on the road every day. Especially since I sold my little fuel efficient beater when they told us we can work from home 4 days a week. I'd like to find something closer to come, or ideally working from home. I made decisions on where my kids go to school and some other life decisions based off of that so it makes it very difficult on my family when my wife has to do dropoff and pickup for my younger son every day on top of trying to work her job.

I have over 20 years experience in mechanical design. Most of it in the HVAC and mechanical systems field , about 19 years, using ACAD and Revit but I have machine design experience using SolidWorks (which I honestly prefer). I also have experience growing a business and managing employees. I grew my parts business from borrowing $300 in my 2 car garage to a business with a big shop and 4 employees. I also grew my decal business from a Cricut Joy my parents bought me for Christmas a few years back into a shop that sold $50k in stickers on eBay and Etsy last year and has several large scale cutters and a commercial printer.

So I'm really open to anything as long as the money is decent and it works for my family. I can't afford to take much of a pay cut so I know my options are limited, but I'm just throwing it out there. I honestly could go for a career change.
Click to expand...
That’s a heck of a spread in options! Good luck man!! Be happy is 99% of life.
 
skyhighZJ said:
That’s a heck of a spread in options! Good luck man!! Be happy is 99% of life.
Click to expand...
Thanks man. Honestly running my shop was tons of fun to me, but running a business that size with kids that were as young as mine at the time was very tough so I tapped out at the right time.
 
Company I work for is looking to hire a new client manager for high end custom homes. Looking for someone in the custom home industry, but open to anyone who might also have sales experience.
You would work with clients to establish their needs, evaluate plans and basically help them from walking in the door to pre-construction, plan development and then to executed contract, and help manage clients expectations, and budgets. Working with our team to create budgets.

Job isn't posted yet but you can message me and I can get your information to the right people.

Current client manager is leaving to focus on growing his non profit that he established. And will stay on staff to train over the next 4-5 months

You can see some of our work at our website
Buchananconstruction.com
 
I’m always looking for HD diesel mechanics. Especially if you are good with bus HVAC. If you’ve never worked on buses we can train you up.
 
Loganwayne said:
Company I work for is looking to hire a new client manager for high end custom homes. Looking for someone in the custom home industry, but open to anyone who might also have sales experience.
You would work with clients to establish their needs, evaluate plans and basically help them from walking in the door to pre-construction, plan development and then to executed contract, and help manage clients expectations, and budgets. Working with our team to create budgets.

Job isn't posted yet but you can message me and I can get your information to the right people.

Current client manager is leaving to focus on growing his non profit that he established. And will stay on staff to train over the next 4-5 months

You can see some of our work at our website
Buchananconstruction.com
Click to expand...
With a good support team, this seems like it would be a fun job. A mix of sales and project management, plus you get to help people make their dreams come true.
 
Loganwayne said:
Company I work for is looking to hire a new client manager for high end custom homes. Looking for someone in the custom home industry, but open to anyone who might also have sales experience.
You would work with clients to establish their needs, evaluate plans and basically help them from walking in the door to pre-construction, plan development and then to executed contract, and help manage clients expectations, and budgets. Working with our team to create budgets.

Job isn't posted yet but you can message me and I can get your information to the right people.

Current client manager is leaving to focus on growing his non profit that he established. And will stay on staff to train over the next 4-5 months

You can see some of our work at our website
Buchananconstruction.com
Click to expand...
What city?
 
Andy J. said:
With a good support team, this seems like it would be a fun job. A mix of sales and project management, plus you get to help people initiate their divorce
Click to expand...
FIFY :laughing:
 
IMG_7661.jpeg
 
12914.jpeg


Growing company looking for candidates for employment. Company serves a large foot print in South East Fire apparatus industry. Company has multiple crews and techs on the road and needs to expand inside the plant to support home operations. Operations are based in the edge of Iredell County bordering Alexander.

Fabrication/Welder/Installer. Experience with many trades skills preferred but not required. Welding of Aluminum, Stainless Steel,and Plain Carbon Steel. Process used will GTAW and GMAW (Tig/Mig).

Press brake, shear, bandsaw, various drilling is part of the job. Future lathe and mill work may follow. Layout to finish product is expected.

Candidate must also be willing to aquire hand tools of the trade. Consumables and specialty tools provided.

Additional trade experience is not needed but will be apart of the job scope. Mechanical abilities that range from installing aftermarket bumpers to 12 volt consoles, lighting, and manufacture 12 volt harnesses and controls. Cutting, threading and assembly of piping in Stainless and Carbon Steel, related brass, and air fittings also is part of the equation.

Tear down of older equipment for repair or refurbish is also expected.

Heavy mechanical, service and pm type work is covered by others. However applicant needs to be very capable of handling material in all positions. Getting under, over and maneuvered about various apparatus required.

At this point in company growth the ideal candidate needs to be comfortable having task handed down and capable of working alone and often with a partner. Growth and potential to become a department lead in a more specialized task is a very real potential.....ie heavy fab or 12 volt wiring specialist.

A motivated individual from a motorsport, racing, or trade school background is an ideal candidate. Come help create new sometimes life saving equipment for the communities you live in and around.

Our products value in pennies to multiple hundreds of thousands of dollars. The growing company is looking for excellence.

Please email me directly at warriorwelding@gmail.com for details.
 
Last edited:
Anything out there that's Friday to Sunday? Thinking of picking up another job to try and pay off some debts and since my work won't give me OT I need to find something to work on the weekends.
 
BNielsen said:
Anything out there that's Friday to Sunday? Thinking of picking up another job to try and pay off some debts and since my work won't give me OT I need to find something to work on the weekends.
Click to expand...
Not sure if Lexington is too far of a drive for you. Hourly + commission on membership sales, add ons etc.
ModWash Lexington NC
 
Not sure how many we have in the area or are willing to move, but - looking to hire experienced commercial electricians and experienced helpers in the Greenville, SC, Easley/Anderson area.

Good pay - excellent benefits.

Shout if interested or pass my info along to anyone you know who might be
 
So, It looks like I'm getting laid off from Dell on Monday. Am I sure, No but I got an email that I suspect is a layoff meeting with my supervisors supervisor. Interestingly enough, my supervisor got the same email meeting 30 minutes before me so I firmly believe it's the annual August purge.

I'm 65 and not ready to retire but can if forced into it. While I would prefer a remote position, I'm open to a shop or office within 30 minutes or so from Reidsville. I have an IT background, specializing in hardware and know a bit about networking and storage, have spent the last 5 years doing workload analysis. Good with my hands, have done fabrication and can weld but far from a pro. Can do low voltage wiring. I also have a Class A CDL with passenger endorsement but would need to get a Medical Card unless it's in-state driving. I drove buses for Disney for 5 years. I can sell but would prefer not to. I also have done electronics repair but mostly before the SMT stuff. I would classify myself as a handyman hobbyist with welding, plumbing, electric and woodworking. Wouldn't be upset with a part time position to fill the gap from full time pay and taking SS and 401K disbursements.

Anybody need someone like me or know a place where they would hire a 65 year old fat white guy until I'm ready to retire (about 5 years from now)?
 
Last edited:
cranbiz said:
So, It looks like I'm getting laid off from Dell on Monday. Am I sure, No but I got an email that I suspect is a layoff meeting with my supervisors supervisor. Interestingly enough, my supervisor got the same email meeting 30 minutes before me so I firmly believe it's the annual August purge.

I'm 65 and not ready to retire but can if forced into it. While I would prefer a remote position, I'm open to a shop or office within 30 minutes or so from Reidsville. I have an IT background, specializing in hardware and know a bit about networking and storage, have spent the last 5 years doing workload analysis. Good with my hands and can weld but far from a pro. Can do low voltage wiring. I also have a Class A CDL with passenger endorsement but would need to get a Medical Card unless it's in-state driving. I drove buses for Disney for 5 years. I can sell but would prefer not to. Wouldn't be upset with a part time position to fill the gap from full time pay and taking SS and 401K disbursements.

Anybody need someone like me or know a place where they would hire a 65 year old fat white guy until I'm ready to retire (about 5 years from now)?
Click to expand...
WTF Bob?!?!

I give you shit but, this makes me want to burn down a building bro

office space workplace GIF by Tech Noir
 
CasterTroy said:
WTF Bob?!?!

I give you shit but, this makes me want to burn down a building bro

office space workplace GIF by Tech Noir
Click to expand...
It was a shock to see that email, received after working hours. Called my boss on his cell and talked. Going to keep it professional although a phone call to Matt might be in the cards :D.
The rumor mill says it's going to be in the thousands all over the world. I'm sure age is playing into it.
 
BNielsen said:
Lexington isn't far at all; I'll keep this on the list, I applied for a lumper position for a warehouse in Salisbury,
Click to expand...


If Lexington isn't too far for you, check out Careers | EGGER. There are openings in manufacturing, transportation and office jobs currently. Pretty decent pay for the area, too.
 
cranbiz said:
I'm sure age is playing into it.
Click to expand...
IBM calls it a "resource action" and they as well as AT&T seems to time these for folks with 27-29 years with the company

I'm not OK with these actions and these days I relate more to Marvin and his love of Komatsu dozers 😡

Of course Matt is always an option but your welding experience is appreciated 😇
 
ManglerYJ said:
If Lexington isn't too far for you, check out Careers | EGGER. There are openings in manufacturing, transportation and office jobs currently. Pretty decent pay for the area, too.
Click to expand...
Little over an hour. Just a bit out of the range I was looking for.
 
CasterTroy said:
I'm not OK with these actions and these days I relate more to Marvin and his love of Komatsu dozers 😡

Of course Matt is always an option
Click to expand...
I don’t understand why these two don’t go together. KilldozerFlamethrozer is actually the complete correct answer, Marv just didn’t have the funding or patience left to finish.
 
Back
Top