BigClay
Knower of useless ZJ things
- Joined
- Sep 24, 2008
- Location
- Winston-Salem
What have you done to your rig today?
- Thread starter broncosbybart
- Start date
Chris_Keziah
Joe Dirt @ Rev Limit Fab
- Joined
- Dec 1, 2010
- Location
- Winston-Salem
CasterTroy
Faster'N You
- Joined
- Mar 21, 2005
- Location
- Wallburg
Chris_Keziah
Joe Dirt @ Rev Limit Fab
- Joined
- Dec 1, 2010
- Location
- Winston-Salem
Says the guy who literally just ordered an Atlas.....Ehh..that's for posers with more wallet than talent
Sent from my SAMSUNG-SM-G890A using Tapatalk
Chris_Keziah
Joe Dirt @ Rev Limit Fab
- Joined
- Dec 1, 2010
- Location
- Winston-Salem
Got the rear diff cover on, looks a little to poser all pretty and clean. The Flats in a few weeks shall fix that.
Adam the other day was messing with the Jeep and found the rear track bar bracket was loose. Upon further inspection the bolt was too long and hitting the gas tank skid. Gained a good 1-1.5" of down travel.
Then ran the coax and power for the cb. Still have to run the wires to the battery but got them ran down the cage and through the dash.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Adam the other day was messing with the Jeep and found the rear track bar bracket was loose. Upon further inspection the bolt was too long and hitting the gas tank skid. Gained a good 1-1.5" of down travel.
Then ran the coax and power for the cb. Still have to run the wires to the battery but got them ran down the cage and through the dash.
Sent from my SAMSUNG-SM-G890A using Tapatalk
jeepin' jen
Slummin' with a sami
- Joined
- Nov 19, 2007
- Location
- Salisbury, NC
- Joined
- Mar 13, 2005
- Location
- Raleigh, NC
a_kelley
mechanical fixer
- Joined
- Jan 26, 2010
- Location
- Rutherfordton
Xj decided to fire the rear drive shaft.
Direct result of incorrect pinion angle, 4" of lift and binding yokes over the past years and about six universals. Presently running FWD 4wd as it's my DD work Jeep. Need to fix the pinion angle and change the yoke at the case for a high clearance or sye and obviously the yoke on the rear end.
Direct result of incorrect pinion angle, 4" of lift and binding yokes over the past years and about six universals. Presently running FWD 4wd as it's my DD work Jeep. Need to fix the pinion angle and change the yoke at the case for a high clearance or sye and obviously the yoke on the rear end.
Whoa, what the hell are yall doing!
CasterTroy
Faster'N You
- Joined
- Mar 21, 2005
- Location
- Wallburg
It's shawn....he likely saw an argument on jeep forums about a dime size hole in the firewall controversy and he needed to prove someone wrong
Looks like he's doing the cage deal
BigClay
Knower of useless ZJ things
- Joined
- Sep 24, 2008
- Location
- Winston-Salem
This is the picture I imagine with the following caption in the for sale section "jeep project for sale, 99% complete, $20k"
Tom@Hilltop_Machine
Well-Known Member
- Joined
- Mar 31, 2005
- Location
- Rural Retreat, VA
Turned on the battery charger today for a bit.
broncosbybart
Is it 5 YET?
- Joined
- May 15, 2008
- Location
- Charlotte, NC
Got a few odds and ends done on mine Friday night. Was time for an oil change, heims on the steering, and rid one tire of a bunch of mud packed in the bead seat. Then, off to the gas station to fill up for the workday on Sat.
- Joined
- Mar 13, 2005
- Location
- Raleigh, NC
Detailing for the car show. You wouldn't believe how much dirt was behind the dash. Let's just say there was a wheelbarrow involved.
- Joined
- Mar 20, 2005
- Location
- Hendersonville, NC
Built a radiator skid plate and wrapped up the Undercover Fab front cover/truss install.
I'll post more pics in my build thread.
I'll post more pics in my build thread.
frankenyoter
No Rain, No Rainbow
- Joined
- Mar 17, 2009
- Location
- DARK CITY
NickMaul
Well-Known Member
- Joined
- Jul 4, 2009
- Location
- Norfolk, VA
a_kelley
mechanical fixer
- Joined
- Jan 26, 2010
- Location
- Rutherfordton
Scavenged a yoke for my 8.25 rear, swapped the xj slip yoke for a yj slip yoke, new universal, and it's silky smooth on the street now. Although FWD was fun (spin all the way to 35 mph from a stop, without power braking), sure is nice to have rwd and 4wd back. No more knocking of the joints at full droop either. (She's got something like 3-4" of lift in the rear) yj slip yokes are deeper throat and allow more joint motion than the xj yokes and the yj is getting sue. Win win.
Yea, those one in the Parts for sale would be nice to have. The truck needs the tires worse than the jeep though....looks like I'm running cheater slicks
DSM Turbos
Well-Known Member
- Joined
- Feb 25, 2006
- Location
- Raleigh, NC
It wasn't today, but I painted the new to me rig black. Cleaned up the frame, put a new coat of paint on that too, then took the seats apart to get the sliders working again.
Mangonesailor
Active Member
- Joined
- Sep 6, 2015
- Location
- "Triad"
Fitted up my extra dash cam mount and power cable so I can run it in the bronco.
Hoping to have some decent footage when I go to the Drive and Dine this weekend.
Hoping to have some decent footage when I go to the Drive and Dine this weekend.
powerstrokin04
Well-Known Member
- Joined
- Oct 2, 2008
- Location
- Ellenboro NC
Picked up a warn xd9000 today for my cj.
Sent from my SCH-I545 using Tapatalk